<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>default Archives - DOLPH MICROWAVE</title>
	<atom:link href="https://www.dolphmicrowave.com/category/default/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.dolphmicrowave.com/default/</link>
	<description>Precision Waveguide Components - Station Antennas</description>
	<lastBuildDate>Fri, 13 Nov 2026 16:05:31 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.0.8</generator>

<image>
	<url>https://www.dolphmicrowave.com/wp-content/uploads/2026/10/cropped-icon-1-100x100.webp</url>
	<title>default Archives - DOLPH MICROWAVE</title>
	<link>https://www.dolphmicrowave.com/default/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>How Do Mesh and Solid Satellite Dishes Compare?</title>
		<link>https://www.dolphmicrowave.com/default/mesh-vs-solid-satellite-dishes-a3bae3ca/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Fri, 13 Nov 2026 10:23:36 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9705</guid>

					<description><![CDATA[<p>Mesh vs solid satellite dishes compared by band, surface accuracy, gain, wind load and upkeep, with wavelength budgets and worked gain examples to guide your choice.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/mesh-vs-solid-satellite-dishes-a3bae3ca/">How Do Mesh and Solid Satellite Dishes Compare?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img fetchpriority="high" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1.webp" alt="How Do Mesh and Solid Satellite Dishes Compare?" class="wp-image-9707" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9705-1-600x337.webp 600w" sizes="(max-width: 1400px) 100vw, 1400px" /></figure><p>Mesh satellite dishes use an open conductive screen; solid dishes use a continuous reflecting surface. Mesh can reduce reflector weight and wind loading on large antennas, while solid reflectors are usually the simpler choice when short wavelengths demand a precise surface. Neither type has an automatic gain advantage: compare diameter, efficiency, surface accuracy, and the operating band. Surface errors become more costly as wavelength decreases, regardless of reflector construction <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<h3>Mesh vs Solid at a Glance</h3>
<table>
<thead><tr><th>Factor</th><th>Mesh dish</th><th>Solid dish</th></tr></thead>
<tbody>
<tr><td>Reflecting surface</td><td>Conductive screen supported by a frame</td><td>Continuous conductive surface, including joined solid panels</td></tr>
<tr><td>Weight</td><td>Can reduce reflector mass for a large aperture</td><td>Depends on material, thickness, and support structure</td></tr>
<tr><td>Wind</td><td>Openings can reduce loading; actual benefit depends on the design</td><td>No airflow through the reflecting skin; use the complete antenna&#8217;s load ratings</td></tr>
<tr><td>Frequency fit</td><td>Mesh geometry and surface accuracy must suit the shortest operating wavelength</td><td>Often preferred for Ku/Ka terminals, but still needs verified surface accuracy</td></tr>
<tr><td>Inspection focus</td><td>Tears, slack mesh, panel alignment, and fasteners</td><td>Dents, warped panels, joints, and feed alignment</td></tr>
</tbody>
</table>
<p>A published deployable-antenna study used lightweight silver-coated Teflon mesh to increase aperture diameter while limiting mass. It also showed why a reflective screen alone is not enough: deformation of the supporting structure degraded antenna performance <a href="https://pmc.ncbi.nlm.nih.gov/articles/PMC10819937/">[2]</a>.</p>
<h3>Which Frequency Bands Suit Each Type?</h3>
<p>As a practical starting point, consider mesh for a large C-band installation where weight and wind exposure matter, and solid for a conventional Ku- or Ka-band terminal. These are selection preferences, not physical cutoffs. Engineered mesh can operate at shorter wavelengths when its geometry, conductivity, tension, and supporting frame are suitable.</p>
<p>ESA lists C-band as 4–8 GHz, Ku-band as 12–18 GHz, and Ka-band as 26–40 GHz. These broad letter-band ranges are not the exact transmit or receive allocations of every satellite service. Obtain the actual operating frequencies before choosing a reflector or feed <a href="https://www.esa.int/Applications/Connectivity_and_Secure_Communications/Satellite_frequency_bands">[3]</a>.</p>
<h3>Do Mesh Holes Lose Signal?</h3>
<p>They can, but visible openings do not mean the same fraction of radio energy passes through. Reflection depends on the mesh structure relative to wavelength. In the published study, a model of a particular silver-coated Teflon mesh with 20 openings per inch had reflectivity above 97% over 2–18 GHz. That result applies to that mesh and analysis, not to every garden screen or commercial mesh dish <a href="https://pmc.ncbi.nlm.nih.gov/articles/PMC10819937/">[2]</a>.</p>
<p>For an illustrative uniform mesh with 20 openings per inch, the nominal repeat pitch is 25.4 / 20 = 1.27 mm. Pitch is not clear-hole width: the strands occupy part of each repeat. Using wavelength = c / frequency, with c = 299,792,458 m/s, gives the following comparison <a href="https://physics.nist.gov/cgi-bin/cuu/Value?c|search_for=speed+of+light">[4]</a>.</p>
<table>
<thead><tr><th>Frequency</th><th>Free-space wavelength</th><th>1.27 mm pitch relative to wavelength</th></tr></thead>
<tbody>
<tr><td>4 GHz</td><td>74.95 mm</td><td>About 1/59</td></tr>
<tr><td>12 GHz</td><td>24.98 mm</td><td>About 1/20</td></tr>
<tr><td>18 GHz</td><td>16.66 mm</td><td>About 1/13</td></tr>
<tr><td>30 GHz</td><td>9.99 mm</td><td>About 1/8</td></tr>
</tbody>
</table>
<p>These ratios show how the same mesh becomes electrically coarser at higher frequencies. They do not establish a universal leakage threshold or predict gain. The cited mesh analysis stops at 18 GHz; its reflectivity result should not be extended to 30 GHz without further evidence.</p>
<h3>Surface Accuracy Matters More at High Frequencies</h3>
<p>Both constructions must hold the intended paraboloid. A solid skin does not guarantee accuracy, and a fine mesh cannot compensate for a distorted frame. For random surface errors described by the Ruze model, the surface-efficiency factor is exp[-(4 × pi × sigma / wavelength)<sup>2</sup>], where sigma is RMS surface error. RMS describes the error across the surface, not the depth of one isolated dent <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<p>NRAO notes that surface efficiency declines rapidly as RMS error exceeds about wavelength/16. This is a rough reference, not a low-loss acceptance limit. Substituting wavelength/16 into the equation gives approximately 54% surface efficiency, or 2.68 dB loss. A link with less loss allowance needs tighter accuracy <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<table>
<thead><tr><th>Frequency</th><th>Wavelength/16 reference</th><th>Calculated loss with 1.0 mm RMS error</th></tr></thead>
<tbody>
<tr><td>4 GHz</td><td>4.68 mm</td><td>0.12 dB</td></tr>
<tr><td>12 GHz</td><td>1.56 mm</td><td>1.10 dB</td></tr>
<tr><td>18 GHz</td><td>1.04 mm</td><td>2.47 dB</td></tr>
<tr><td>30 GHz</td><td>0.62 mm</td><td>6.87 dB</td></tr>
</tbody>
</table>
<p>The error is assumed for illustration. These figures describe the modeled surface-error loss alone, not total antenna efficiency. Feed displacement, panel steps, and localized damage can require a more specific analysis.</p>
<h4>A Worked Selection Scenario</h4>
<p>Suppose you are comparing reflectors with a documented 1.0 mm RMS surface error for a 12 GHz receive link and a 30 GHz link. The table predicts about 1.10 dB surface loss at 12 GHz but 6.87 dB at 30 GHz. If your assumed surface-loss allowance is only 1 dB, that accuracy misses the target at both frequencies, especially at 30 GHz. Choosing a solid reflector helps only if its verified accuracy meets the requirement; changing the material label alone does not close the link.</p>
<h3>Does Mesh or Solid Give More Gain?</h3>
<p>At equal diameter, frequency, and aperture efficiency, the calculated gain is the same. The relation is G = efficiency × (pi × diameter / wavelength)<sup>2</sup>, with gain in dBi equal to 10 × log10(G). Construction changes the result through efficiency and the shape the antenna maintains in service <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[5]</a>.</p>
<table>
<thead><tr><th>Diameter</th><th>Gain at 4 GHz</th><th>Gain at 12 GHz</th><th>Gain at 30 GHz</th></tr></thead>
<tbody>
<tr><td>1.2 m</td><td>31.8 dBi</td><td>41.4 dBi</td><td>49.3 dBi</td></tr>
<tr><td>2.4 m</td><td>37.8 dBi</td><td>47.4 dBi</td><td>55.3 dBi</td></tr>
</tbody>
</table>
<p>These are calculated on-axis values assuming 60% total aperture efficiency at every frequency, not product specifications. Doubling diameter adds approximately 6.02 dB under that assumption. Do not apply the surface-loss table again if the chosen total efficiency already includes that loss.</p>
<h3>Wind, Weight, and Installation</h3>
<p>Mesh openings can let some air pass through, but they do not make a dish windproof. Porosity, orientation, frame geometry, and mounting all affect the load. A lightweight reflector also does not automatically make the entire antenna assembly lighter. Compare documented assembly mass and wind loads rather than assuming a fixed percentage saving.</p>
<p>Wind can deform a reflector and reduce performance before structural failure occurs <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>. Ask separately about operating-wind limits and survival ratings, including their stated conditions. A survival rating is not a promise of usable pointing or gain at that wind speed. Severe winds are a real damage hazard; NWS guidance provides weather-safety context, not an antenna structural rating <a href="https://www.weather.gov/safety/wind">[6]</a>.</p>
<h3>Inspection and Upkeep</h3>
<p>For solid reflectors, inspect dents, warped panels, joints, and the feed support. For mesh, inspect tears, slack areas, panel alignment, and loose fasteners. Surface distortion affects phase and focusing; mesh-frame deformation also affects the radiation pattern <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a> <a href="https://pmc.ncbi.nlm.nih.gov/articles/PMC10819937/">[2]</a>.</p>
<p>After damage or a storm, photograph visible changes and compare them with installation records. Visual inspection can identify a problem, but it cannot certify submillimeter RMS accuracy. Request the manufacturer&#8217;s prescribed checks and, where needed, a surface survey or RF performance test. Feed alignment and reflector accuracy are separate checks; re-pointing alone does not repair a distorted surface.</p>
<h3>Which Dish Should You Choose?</h3>
<p>Start with the service frequencies, required gain, and polarization. The feed system, including any <a href="https://www.dolphmicrowave.com/product/omt-orthogonal-mode-transducer/">orthomode transducer</a>, must suit the required polarization paths.</p>
<ul>
<li>For a large C-band installation, shortlist mesh where weight or wind loading matters, then verify the complete antenna&#8217;s gain and structural ratings.</li>
<li>For a conventional Ku/Ka terminal, start with a solid reflector designed for the service. Consider mesh only with relevant performance evidence.</li>
<li>For portable installations, compare packed size, assembly mass, and deployment needs. A <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">1.2 m quick-deploy flyaway antenna</a> is a size-and-format example, not evidence that all small reflectors perform alike.</li>
<li>Check the <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feedhorn</a> against the reflector geometry, focal ratio, and band. Its phase center must be positioned appropriately for the focus <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</li>
</ul>
<p>When comparing <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM antennas</a>, request gain across the actual band, documented RMS accuracy, mesh geometry where relevant, assembly mass, and operating/survival wind conditions. Include the mount and foundation in the installed-cost comparison. Mesh is attractive when an open, lightweight reflector meets those requirements; solid is attractive when a continuous surface delivers the required precision. Choose the verified antenna, not the surface label.</p>
<div data-cta="true" style="border:1px solid #e5e7eb;border-left:3px solid #060097;padding:20px 22px;margin:28px 0;">
<p style="margin:0 0 8px;font-size:17px;line-height:1.6;color:#1e293b;font-weight:600;">Not sure which reflector fits your band and site?</p>
<p style="margin:0 0 16px;font-size:15px;line-height:1.7;color:#67768e;">Send your operating frequencies, required gain, aperture size, and site constraints.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:10px 26px;border:1px solid #060097;border-radius:4px;color:#060097;font-size:15px;font-weight:600;text-decoration:none;letter-spacing:0.3px;">Discuss Your Requirements</a>
</div>
<h3>Sources</h3>
<ol>
<li>NRAO, Essential Radio Astronomy, Chapter 3: reflector focusing, surface error, and the Ruze equation. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">Read the chapter</a>.</li>
<li>Design of a Deployable Broadband Mesh Reflector Antenna for a SIGINT Satellite System Considering Surface Shape Deformation, Sensors, via PMC: specific mesh modeling and prototype results. <a href="https://pmc.ncbi.nlm.nih.gov/articles/PMC10819937/">Read the study</a>.</li>
<li>ESA: broad satellite frequency-band designations. <a href="https://www.esa.int/Applications/Connectivity_and_Secure_Communications/Satellite_frequency_bands">Satellite frequency bands</a>.</li>
<li>NIST: exact speed of light used in the wavelength calculations. <a href="https://physics.nist.gov/cgi-bin/cuu/Value?c|search_for=speed+of+light">Speed of light in vacuum</a>.</li>
<li>University of Hawaii OER: antenna gain and link-budget relationships. <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">Link-budget chapter</a>.</li>
<li>U.S. National Weather Service: general wind hazards and safety. <a href="https://www.weather.gov/safety/wind">Wind safety</a>.</li>
</ol>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/mesh-vs-solid-satellite-dishes-a3bae3ca/">How Do Mesh and Solid Satellite Dishes Compare?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Which Satellite Dish Materials Resist Coastal Corrosion?</title>
		<link>https://www.dolphmicrowave.com/default/satellite-dish-materials-coastal-corrosion-f14a47c3/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Fri, 13 Nov 2026 09:54:32 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9704</guid>

					<description><![CDATA[<p>Compare fiberglass, coated aluminum, galvanized steel, and stainless fasteners for coastal satellite dishes, with coating grades, isolation, drainage, and inspection guidance.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/satellite-dish-materials-coastal-corrosion-f14a47c3/">Which Satellite Dish Materials Resist Coastal Corrosion?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704.webp" alt="Which Satellite Dish Materials Resist Coastal Corrosion?" class="wp-image-9708" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/dolphmicrowave_9704-600x337.webp 600w" sizes="(max-width: 1400px) 100vw, 1400px" /></figure><p>Fiberglass or another fiber-reinforced polymer reflector avoids iron rust in the panel itself. Coated aluminum is another option for coastal dishes, while hot-dip galvanized steel can protect mounts and supporting structures. Stainless-steel hardware also needs a suitable grade and compatible joints. There is no universal material ranking for a complete dish: compare the reflector, mount, coating, and fasteners separately, then match the assembly to the site&#8217;s salt exposure.</p>
<h3>What Coastal Corrosion Means for Material Choice</h3>
<p>Airborne salinity, temperature-humidity conditions, and sulfur-dioxide pollution are key factors in the ISO 9223 framework for atmospheric corrosivity. A coastal location therefore needs an exposure assessment, not just a material label <a href="https://www.iso.org/standard/53499.html">[1]</a>.</p>
<blockquote>
<p>Salt-spray hours alone do not establish how many years a dish will last outdoors. ASTM B117 describes a controlled test environment and cautions that prediction of natural-environment performance has seldom correlated with salt-spray results used as stand-alone data <a href="https://www.astm.org/b0117-19.html">[2]</a>.</p>
</blockquote>
<p>Rust on carbon steel is only one failure mode. Pitting, crevice corrosion, and galvanic corrosion also matter when evaluating metal panels and joints. A dish that looks sound across its face may still need attention at its connections <a href="https://www.ampp.org/resources/what-is-corrosion">[3]</a>.</p>
<h3>Coastal Dish Materials Compared</h3>
<p>Use this comparison to identify what each material contributes, rather than treating it as a tested best-to-worst ranking. Product-specific construction and exposure determine the final choice.</p>
<table>
<thead>
<tr><th>Material and component</th><th>Corrosion advantage</th><th>What to verify</th></tr>
</thead>
<tbody>
<tr><td>Fiberglass or other fiber-reinforced polymer reflector</td><td>The polymer-and-fiber panel does not form iron rust</td><td>Surface durability, sealed edges and inserts, any metallic reflective layer, and the separate metal backing structure</td></tr>
<tr><td>Coated aluminum reflector</td><td>Aluminum has a protective oxide film; a suitable coating adds a barrier</td><td>Alloy, coating system, edge coverage, drainage, and isolation at dissimilar-metal joints</td></tr>
<tr><td>Hot-dip galvanized steel mount or structure</td><td>Zinc protects the underlying steel</td><td>Applicable material category, coating standard and grade, damaged-area repair, and whether an additional paint system is specified</td></tr>
<tr><td>Stainless-steel fasteners and small parts</td><td>Can offer better corrosion resistance than unprotected carbon-steel hardware</td><td>Exact grade, strength requirements, crevice exposure, and compatibility with aluminum and galvanized parts</td></tr>
</tbody>
</table>
<h3>Fiberglass Reflectors Avoid Panel Rust, Not All Deterioration</h3>
<p>A fiberglass reflector removes iron rust as a failure mode in the composite panel, but that does not establish the life of the complete antenna. Ask how the rim, mounting inserts, rear frame, and reflective surface are constructed. A composite face can still depend on steel brackets or a metal backing structure.</p>
<p>Check the manufacturer&#8217;s requirements for ultraviolet exposure, surface damage, and repair. If a chip exposes fibers or an edge seal is damaged, use the specified repair procedure. Do not assume that a non-rusting panel makes its mount or embedded hardware maintenance-free.</p>
<h3>Coated Aluminum Needs Sound Edges and Compatible Joints</h3>
<p>For aluminum panels, request the alloy and complete coating system, including pretreatment and coverage on rear faces, holes, and cut edges. A coating defect does not mean instant failure, but it is a location to assess for localized attack rather than ignore because the panel is aluminum.</p>
<p>Review brackets, rivets, and feed connections for dissimilar-metal contact. When checking the <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feedhorn</a> assembly, distinguish the feed body from its support arm: their materials and protective finishes need not be the same. Ask the supplier how each interface is protected without obstructing drainage.</p>
<h3>Galvanized Steel Needs a Component-Specific Coating Specification</h3>
<p>Hot-dip galvanizing forms a bonded zinc-iron alloy coating when fabricated steel is immersed in molten zinc. The American Galvanizers Association describes this process as corrosion protection for the steel substrate <a href="https://galvanizeit.org/hot-dip-galvanizing/what-is-galvanizing">[4]</a>.</p>
<p>For mounts and supporting structures, request the applicable galvanizing specification, coating grade, and repair procedure. ASTM A123/A123M covers hot-dip zinc coatings on a range of fabricated and unfabricated iron and steel products, including structural fabrications; its scope does not make one coating grade suitable for every component <a href="https://www.astm.org/a0123_a0123m-17.html">[5]</a>.</p>
<p>The AGA&#8217;s published summary illustrates why the material category matters. Its structural-shapes row includes minimum average coating grades of 45, 65, 75, and 100 µm across increasing steel-thickness bands. For a structural shape well above 6.4 mm, the listed grade is 100 µm; the pipe-and-tubing row instead lists 75 µm in that thickness range. These are category-specific minimum average requirements, not universal coastal-dish specifications <a href="https://galvanizeit.org/knowledgebase/article/astm-a123-a123m">[6]</a>.</p>
<h4>A Worked Specification Check for a Tubular Pole</h4>
<p>Suppose a quote describes a tubular pole with an 8 mm wall and says only “galvanized.” In the AGA summary, the pipe-and-tubing category at that thickness lists grade 75, while the structural-shapes category lists grade 100. The practical check is to ask which material category and specification edition the supplier is applying, then request its coating inspection record. The 8 mm dimension here is an illustrative input, not a measured product or a field test <a href="https://galvanizeit.org/knowledgebase/article/astm-a123-a123m">[6]</a>.</p>
<p>For scale, the same summary gives grade 45 as approximately 1.8 mils or 320 g/m² and grade 100 as approximately 3.9 mils or 705 g/m². It also states that time to first maintenance in atmospheric exposure is proportional to zinc thickness with other variables held constant. That relationship is not a service-life promise for two different coastal sites <a href="https://galvanizeit.org/knowledgebase/article/astm-a123-a123m">[6]</a>.</p>
<p>For severe exposure, ask whether the specified protection includes a compatible paint-over-galvanizing system. Confirm surface preparation, repair of handling damage, and suitability for any ground or concrete contact separately. Atmospheric coating examples alone do not establish suitability for buried or continuously wet parts.</p>
<h3>Stainless Hardware Still Needs Grade and Joint Checks</h3>
<p>“Stainless screws” is not a complete fastener specification. Request the grade, strength class where applicable, and materials of the matching nuts, washers, and brackets. Stainless steel can suffer localized corrosion in unfavorable conditions; its presence also does not protect an adjacent, less corrosion-resistant metal from galvanic attack <a href="https://www.ampp.org/resources/what-is-corrosion">[3]</a>.</p>
<p>Where the design calls for isolation, ask for the approved washers, sleeves, or other separating detail. Do not replace structural bolts solely to change their material: the replacement must also meet the assembly&#8217;s mechanical requirements. Grounding and bonding connections require their own approved details, not indiscriminate electrical isolation.</p>
<p>If galvanized hardware is specified instead, confirm its hardware standard. ASTM A153/A153M addresses hot-dip zinc coatings on iron and steel hardware, with coating weight or thickness requirements by material class. The linked edition is historical, so the purchase specification should identify the applicable edition rather than treating this reference as the latest requirement <a href="https://www.astm.org/a0153_a0153m-16a.html">[7]</a>.</p>
<h3>How to Compare Two Coastal Antenna Quotes</h3>
<p>Consider a buying scenario: one quote names a composite reflector but leaves the mount coating unspecified; another names an aluminum reflector and documents its coating, mount protection, and hardware materials. The first quote cannot be judged more corrosion-resistant just because the reflector does not rust. Request the missing assembly details before comparing them.</p>
<p>The same review applies to <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">compact flyaway terminals</a> and <a href="https://www.dolphmicrowave.com/product/11-3-meter-earth-station-antenna/">large fixed antennas</a>, although their structural requirements differ. When comparing <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM antenna configurations</a>, keep corrosion protection separate from aperture, wind loading, foundation, and grounding requirements. Meeting one requirement does not demonstrate compliance with the others.</p>
<p>Before purchase, request these details for the exact model:</p>
<ul>
<li>Reflector material, surface finish, and any metallic layers or backing</li>
<li>Mount and pole material categories, coating standards, editions, and grades</li>
<li>Fastener grades and the approved details for dissimilar-metal joints</li>
<li>Permitted coating repairs and cleaning methods</li>
<li>Inspection intervals and any exclusions for direct marine exposure</li>
</ul>
<blockquote>
<p>If the supplier cannot document the complete assembly, treat its suitability for direct marine exposure as unverified, not as established by the reflector material.</p>
</blockquote>
<h3>Protect the Material Choice After Installation</h3>
<h4>Keep Water from Collecting at Joints</h4>
<p>Check for upward-facing pockets around clamps and brackets. Preserve designed weep paths and clearance at the pole base. Do not seal a drainage opening while trying to weatherproof an adjacent joint.</p>
<h4>Inspect Accessible Damage and Hardware</h4>
<p>Follow the manufacturer&#8217;s inspection interval and cleaning instructions. Where safe access permits, check panel edges, bolt holes, clamps, and the pole base for coating damage, deposits, or visible corrosion. Record the location and condition so the next inspection can identify a change rather than rely on memory.</p>
<p>Use approved repair products, and have fixings and alignment assessed after storms as instructed by the installer. Do not drill extra holes or substitute hardware without approval. Use qualified personnel for climbing, roofing, structural, or grounding work.</p>
<p>For a coastal dish, choose the assembly with documented protection: a suitable composite or coated aluminum reflector, a correctly specified protected mount, and compatible hardware. Non-rusting panels reduce one problem; component-specific coatings, joint design, and maintenance address the rest.</p>
<div data-cta="true" style="border:1px solid #8D1616;border-radius:6px;padding:20px 22px;margin:28px 0;">
<p style="margin:0 0 14px;font-size:16px;line-height:1.6;color:#242424;">Planning a coastal installation? Include the reflector size, mount material, site exposure, and available coating specifications in your inquiry.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;border:1px solid #8D1616;color:#8D1616;border-radius:4px;padding:11px 22px;font-size:15px;font-weight:600;text-decoration:none;letter-spacing:0.02em;">Discuss Coastal Antenna Requirements</a>
</div>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/satellite-dish-materials-coastal-corrosion-f14a47c3/">Which Satellite Dish Materials Resist Coastal Corrosion?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Does Reflector Accuracy Affect Ka-Band Gain?</title>
		<link>https://www.dolphmicrowave.com/default/reflector-accuracy-ka-band-gain-0115e337/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Thu, 12 Nov 2026 08:09:34 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9701</guid>

					<description><![CDATA[<p>Ruze-equation guide to Ka-band reflector accuracy: gain loss vs RMS surface error at 30 GHz, lambda-16 limits, and specification checks.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/reflector-accuracy-ka-band-gain-0115e337/">How Does Reflector Accuracy Affect Ka-Band Gain?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1.webp" alt="How Does Reflector Accuracy Affect Ka-Band Gain?" class="wp-image-9702" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9701-1-600x337.webp 600w" sizes="(max-width: 1400px) 100vw, 1400px" /></figure><p><strong>Reflector surface errors reduce Ka-band gain by disrupting phase alignment across the aperture and scattering power away from the main beam.</strong> For random surface errors at 30 GHz, the Ruze equation predicts approximately 0.62 dB of gain reduction at 0.3 mm RMS, 1.72 dB at 0.5 mm RMS, and 6.87 dB at 1.0 mm RMS, relative to an otherwise identical error-free reflector. The shorter the wavelength, the tighter the required surface tolerance <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<p>The practical question is not whether a dish meets a generic “Ka-band accuracy” label, but whether its measured surface error fits the gain-loss allowance at your operating frequency.</p>
<h3>Why Ka-Band Needs Tighter Reflector Accuracy</h3>
<p>A small surface displacement ϵ produces approximately twice that change in reflected path length near normal incidence. The corresponding phase error is about 4πϵ/λ. At 30 GHz, a local 0.5 mm displacement introduces roughly 0.63 rad, or 36°, of phase error; at 12 GHz, it introduces about 0.25 rad, or 14°. A local dent alone does not determine the whole antenna’s gain loss: its extent and the error distribution also matter <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<p>An ITU-hosted satellite-network presentation discusses 27.5–31 GHz uplinks and 17.7–21.2 GHz downlinks. These are useful comparison ranges, not a claim that every frequency is available for every terminal or region <a href="https://www.itu.int/dms_pub/itu-r/md/12/iturka.band/c/R12-ITURKA.BAND-C-0001%21%21PDF-E.pdf">[2]</a>.</p>
<p>The wavelengths below use λ = c/f and the exact SI value c = 299,792,458 m/s. The λ/16 column is a surface-accuracy rule of thumb, not a mandatory standard or a universal pass/fail limit <a href="https://www.bipm.org/en/measurement-units/si-defining-constants">[3]</a>.</p>
<table>
<thead>
<tr><th scope="col">Frequency</th><th scope="col">Wavelength</th><th scope="col">λ/16 RMS reference</th></tr>
</thead>
<tbody>
<tr><td>17.7 GHz</td><td>16.94 mm</td><td>1.06 mm</td></tr>
<tr><td>20 GHz</td><td>14.99 mm</td><td>0.94 mm</td></tr>
<tr><td>21.2 GHz</td><td>14.14 mm</td><td>0.88 mm</td></tr>
<tr><td>27.5 GHz</td><td>10.90 mm</td><td>0.68 mm</td></tr>
<tr><td>30 GHz</td><td>9.99 mm</td><td>0.62 mm</td></tr>
<tr><td>31 GHz</td><td>9.67 mm</td><td>0.60 mm</td></tr>
</tbody>
</table>
<p>For equal surface-loss allowance, RMS tolerance scales with wavelength. A reflector used at 30 GHz therefore needs 2.5 times tighter surface accuracy than one used at 12 GHz, with other conditions unchanged <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<h3>Calculating Surface Loss With the Ruze Equation</h3>
<p>For approximately Gaussian random surface errors within the model’s assumptions, surface efficiency is the gain ratio relative to an otherwise identical reflector without those errors <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>:</p>
<p>ηs = exp[−(4πσ/λ)²]</p>
<p>Here, σ is RMS surface error and λ is wavelength, expressed in the same units. The signed gain change is ΔG = 10 log10(ηs), which is negative. The corresponding positive loss allowance is Ls = −10 log10(ηs) = 4.343(4πσ/λ)² dB.</p>
<p>Doubling either frequency or RMS error quadruples the loss expressed in dB. At σ = λ/16, the equation gives ηs ≈ 0.54 and a gain reduction of about 2.68 dB. That is already a substantial penalty, not a high-efficiency design target. The missing main-beam contribution is redistributed by scattering; it is not necessarily absorbed as heat <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<h3>Ka-Band Gain Loss by Surface Error</h3>
<p>The following values are calculations at 30 GHz using λ = 9.9931 mm, not measured specifications of a Dolph Microwave product. Negative values indicate gain reductions relative to the error-free reference.</p>
<table>
<thead>
<tr><th scope="col">RMS surface error σ</th><th scope="col">Surface efficiency ηs</th><th scope="col">Gain change at 30 GHz</th></tr>
</thead>
<tbody>
<tr><td>0.1 mm</td><td>0.98</td><td>−0.07 dB</td></tr>
<tr><td>0.2 mm</td><td>0.94</td><td>−0.27 dB</td></tr>
<tr><td>0.3 mm</td><td>0.87</td><td>−0.62 dB</td></tr>
<tr><td>0.4 mm</td><td>0.78</td><td>−1.10 dB</td></tr>
<tr><td>0.5 mm</td><td>0.67</td><td>−1.72 dB</td></tr>
<tr><td>0.6 mm</td><td>0.57</td><td>−2.47 dB</td></tr>
<tr><td>0.7 mm</td><td>0.46</td><td>−3.37 dB</td></tr>
<tr><td>0.8 mm</td><td>0.36</td><td>−4.40 dB</td></tr>
<tr><td>0.9 mm</td><td>0.28</td><td>−5.56 dB</td></tr>
<tr><td>1.0 mm</td><td>0.21</td><td>−6.87 dB</td></tr>
</tbody>
</table>
<h4>Same Surface, Different Frequencies</h4>
<p>The same 0.5 mm RMS surface incurs approximately 0.76 dB of loss at 20 GHz but 1.72 dB at 30 GHz. A dual-band terminal therefore needs separate surface-loss entries for its receive and transmit frequencies.</p>
<table>
<thead>
<tr><th scope="col">RMS error σ</th><th scope="col">Gain change at 12 GHz</th><th scope="col">At 20 GHz</th><th scope="col">At 27.5 GHz</th><th scope="col">At 30 GHz</th></tr>
</thead>
<tbody>
<tr><td>0.2 mm</td><td>−0.04 dB</td><td>−0.12 dB</td><td>−0.23 dB</td><td>−0.27 dB</td></tr>
<tr><td>0.3 mm</td><td>−0.10 dB</td><td>−0.27 dB</td><td>−0.52 dB</td><td>−0.62 dB</td></tr>
<tr><td>0.5 mm</td><td>−0.27 dB</td><td>−0.76 dB</td><td>−1.44 dB</td><td>−1.72 dB</td></tr>
<tr><td>1.0 mm</td><td>−1.10 dB</td><td>−3.05 dB</td><td>−5.77 dB</td><td>−6.87 dB</td></tr>
</tbody>
</table>
<p>Surface efficiency is only one factor in overall antenna performance. Illumination taper, spillover, blockage, conductor loss, and mismatch at the <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feedhorn</a> also affect realized gain. If an illustrative 65% baseline efficiency excludes surface error, multiplying it by ηs ≈ 0.674 gives about 44% at 0.5 mm RMS and 30 GHz. Do not apply that reduction again if the quoted efficiency already includes surface loss.</p>
<h3>Which Surface Errors Can the Equation Predict?</h3>
<p>Manufacturing deviations, gravitational deformation, thermal distortion, and wind loading can all change reflector shape. A factory measurement describes a particular state, not automatically every operating elevation or environmental condition <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<p>Ruze’s statistical model is not a universal conversion from any RMS number to gain. Large-scale systematic errors, such as defocus or coherent sag, require separate analysis. Panel-setting errors are not automatically Gaussian merely because they come from panels; their distribution and spatial correlation matter <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<p>NASA’s <em>Application of Ruze Equation for Inflatable Aperture Antennas</em> provides a useful measured warning. The researchers compared surface measurements with RF measurements and found that Ruze predictions overstated directivity degradation for the tested inflatable reflectors. Wrinkles and large-scale shape errors did not match the model assumptions. The report recommends against using the equation to predict performance for those inflatable antennas; it does not invalidate the random-error calculations above <a href="https://ntrs.nasa.gov/api/citations/20080018466/downloads/20080018466.pdf">[4]</a>.</p>
<h3>A Worked Surface-Accuracy Specification</h3>
<p><strong>Illustrative design scenario:</strong> suppose a 30 GHz link allows no more than 1.0 dB for random surface-error loss. Rearranging the same equation gives σmax = (λ/4π)√(Ls/4.343), or approximately 0.382 mm RMS. Under those assumptions, 0.3 mm RMS fits the allowance, while 0.5 mm RMS does not.</p>
<p>Now suppose a surface report gives 0.3 mm RMS at the factory, but the applicable in-service value is 0.5 mm RMS. The calculated loss increases from 0.62 to 1.72 dB, consuming an additional 1.10 dB. This is a calculation example, not a measured temperature or wind response; it shows why the operating-state measurement matters.</p>
<h4>What to Request With an RMS Figure</h4>
<p>When specifying <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM reflector antennas</a>, ask for the surface report as well as the headline tolerance. Surface-coordinate measurements, including photogrammetry or laser scanning, can characterize shape, but a surface map and a verified RF gain result answer different questions <a href="https://ntrs.nasa.gov/api/citations/20080018466/downloads/20080018466.pdf">[4]</a>.</p>
<ul>
<li>Confirm the measured aperture, reference surface, and whether a best-fit adjustment removed focus or alignment errors that remain relevant to the installed antenna.</li>
<li>Request the measurement method, uncertainty, elevation angle, temperature, and wind or loading conditions.</li>
<li>Check whether the residual errors justify a random-error model. For systematic distortion, request an appropriate electromagnetic analysis or RF measurement.</li>
<li>Calculate surface loss at each actual operating frequency, and establish whether the supplied gain or efficiency already includes it.</li>
</ul>
<p>A bare “0.3 mm RMS” figure can support a conditional calculation, but it cannot by itself establish installed gain. Likewise, surface loss at two antennas on one link contributes to that link’s budget; forward and return links should be assessed separately rather than treated as an automatic doubled round-trip loss.</p>
<h3>Choosing an Accuracy Target That Protects Gain</h3>
<p>Start with the allowable surface-loss budget, then calculate the RMS tolerance at the highest relevant frequency and verify it under the intended operating conditions. At 30 GHz, a 0.3 mm RMS surface corresponds to about 0.62 dB of loss; the λ/16 reference corresponds to about 2.68 dB. Neither number is a universal manufacturing requirement. The right target depends on the loss the link can afford and whether the model describes the measured error pattern <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a>.</p>
<div data-cta="true" style="text-align:center;margin:32px 0 8px 0;">
<p style="color:#1e293b;font-size:16px;line-height:1.6;margin:0 0 16px 0;">Planning a Ka-band terminal with a tight surface-error budget? Send your frequency, aperture size, and accuracy target for an engineering review.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;color:#060097;border:1px solid #060097;border-radius:4px;padding:12px 28px;font-size:16px;text-decoration:none;">Request an Engineering Review</a>
</div>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/reflector-accuracy-ka-band-gain-0115e337/">How Does Reflector Accuracy Affect Ka-Band Gain?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What Does a Dish Antenna&#8217;s F/D Ratio Mean?</title>
		<link>https://www.dolphmicrowave.com/default/dish-antenna-f-d-ratio-meaning-a6fa562b/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Thu, 12 Nov 2026 08:07:35 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9700</guid>

					<description><![CDATA[<p>Understand a dish antenna's F/D ratio, calculate focal length from diameter and depth, and see how reflector geometry guides feed matching and positioning.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/dish-antenna-f-d-ratio-meaning-a6fa562b/">What Does a Dish Antenna&#8217;s F/D Ratio Mean?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1.webp" alt="What Does a Dish Antenna F/D Ratio Mean?" class="wp-image-9703" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9700-1-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p>A dish antenna&#8217;s F/D ratio, also called its focal ratio, is the focal length divided by the reflector diameter. It describes the dish&#8217;s proportions: a lower F/D means a deeper reflector, while a higher F/D means a shallower one. For a circular prime-focus dish, F is measured from the reflector&#8217;s vertex to its focus, and D is the diameter across its opening.<a href="https://www.arrl.org/files/file/Technology/microwave/Parabolic%20Dishes.pdf">[1]</a> An F/D of 0.40 means the focal length is 40% of the diameter. On a 1.2 m dish, that gives F = 0.48 m.</p>
<p>The practical value is feed matching. F/D determines how wide the dish appears from the focus; together with the diameter, it also gives the focal distance. It does not, by itself, tell you the antenna&#8217;s gain or which feed will work at your operating frequency.</p>
<h3>What F and D Stand For</h3>
<p>For a centered paraboloidal reflector, the vertex is the deepest point on the reflecting surface. Measure F from that point along the dish axis, not from the rim plane or the back of the mounting bracket. D is the clear aperture diameter. Because both lengths use the same units, F/D has no units.</p>
<p>Two geometrically similar dishes can have the same F/D despite very different diameters. They present the same angular coverage requirement to the feed, but that does not make their feeds interchangeable: frequency, polarization, phase-center location, and radiation pattern must also match. The ARRL guidance specifically calls for choosing a feedhorn for the reflector&#8217;s F/D and placing its phase center at the focus.<a href="https://www.arrl.org/files/file/Technology/microwave/Parabolic%20Dishes.pdf">[1]</a></p>
<h3>What the Number Tells You</h3>
<p>A deeper dish wraps farther around the feed and needs wider angular illumination. A shallower dish needs narrower illumination and places its focus farther from the vertex for the same diameter. For <a href="https://www.dolphmicrowave.com/product/3-7-4-5-meter-prime-focus-antenna/">prime-focus antennas</a>, a university-repository paper describes 0.3 &lt; F/D &lt; 0.6 as a normal practical range; this is a design range, not a mandatory standard or a guarantee of performance.<a href="https://irep.iium.edu.my/5739/1/Evaluation_of_Parabolic_Antenna_Types_and_Their_Application_in_TVRO_Systems.pdf">[2]</a></p>
<p>The following examples assume an ideal, circular, centered paraboloid with D = 1.2 m. Depth d is measured from the rim plane to the vertex. The depth follows from F = D²/(16d).<a href="https://www.montana.edu/rmaher/publications/maher_aac_0805.pdf">[3]</a> The full rim-to-rim angle at the focus is calculated as 4 × arctan[1/(4 × F/D)], converted to degrees. These are geometry calculations, not product measurements or feed beamwidth specifications.</p>
<table>
<thead>
<tr><th scope="col">F/D</th><th scope="col">Focal length F</th><th scope="col">Dish depth d</th><th scope="col">Full angle seen from the focus</th></tr>
</thead>
<tbody>
<tr><td>0.30</td><td>0.36 m</td><td>0.250 m</td><td>159°</td></tr>
<tr><td>0.35</td><td>0.42 m</td><td>0.214 m</td><td>142°</td></tr>
<tr><td>0.40</td><td>0.48 m</td><td>0.188 m</td><td>128°</td></tr>
<tr><td>0.45</td><td>0.54 m</td><td>0.167 m</td><td>116°</td></tr>
<tr><td>0.50</td><td>0.60 m</td><td>0.150 m</td><td>106°</td></tr>
<tr><td>0.60</td><td>0.72 m</td><td>0.125 m</td><td>90°</td></tr>
</tbody>
</table>
<p>For example, changing F/D from 0.30 to 0.50 moves the focus from 0.36 m to 0.60 m from the vertex: an increase of 0.24 m, or about 67%, not a doubling. At F/D = 0.25, the same equations put the focus in the rim plane and give a full coverage angle of 180°. That geometry makes illumination demanding; it does not mean such a reflector or feed is impossible.</p>
<h3>What F/D Changes on Your Dish</h3>
<h4>Feed position</h4>
<p>The feed&#8217;s phase center should coincide with the reflector focus. The phase center is the effective point from which the feed&#8217;s radiation appears to originate; it is not necessarily the horn mouth or its mounting flange. Use the feed documentation for the relevant frequency rather than measuring to an arbitrary mechanical surface. The ARRL article identifies phase-center placement at the focus as the most critical positioning dimension.<a href="https://www.arrl.org/files/file/Technology/microwave/Parabolic%20Dishes.pdf">[1]</a></p>
<p>Do not treat a fixed millimeter tolerance as universal. A suitable positioning tolerance must come from the antenna and feed design, operating band, and acceptable performance loss. The calculated focus is a starting point for alignment, not a substitute for the manufacturer&#8217;s installation specification.</p>
<h4>Feed pattern</h4>
<p>Choose a <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">microwave feedhorn</a> whose pattern suits the reflector&#8217;s angular extent. Ask for illumination data at the actual operating frequencies, including the feed level toward the rim, rather than matching only a catalog F/D label. Too little illumination near the edge leaves part of the aperture underused; radiation extending beyond the rim produces spillover. Aperture illumination also affects gain, beamwidth, and sidelobes, so F/D alone cannot specify these outcomes.<a href="https://irep.iium.edu.my/5739/1/Evaluation_of_Parabolic_Antenna_Types_and_Their_Application_in_TVRO_Systems.pdf">[2]</a></p>
<h4>Support structure</h4>
<p>A larger F/D places the focus farther from the vertex for a fixed diameter, which can require a more extended feed-support arrangement. University of Cape Town teaching material explicitly notes cumbersome focal supports as a trade-off at large F/D.<a href="https://science.uct.ac.za/sites/default/files/content_migration/science_uct_ac_za/1471/files/ReflectorAntennas.pdf">[4]</a> The vertex-to-focus distance is not automatically the physical length of a support leg; that also depends on where and how the supports attach.</p>
<h3>How to Find Your Dish&#8217;s F/D</h3>
<p>For a circular, centered parabolic reflector with an accessible rim plane, measure the clear diameter D. Place a straightedge across the rim and measure the perpendicular depth d to the vertex of the reflecting surface. Use consistent units and calculate:<a href="https://www.montana.edu/rmaher/publications/maher_aac_0805.pdf">[3]</a></p>
<blockquote>
<p>F = D² / (16d)<br>F/D = D / (16d)</p>
</blockquote>
<h4>A worked measurement example</h4>
<p>Suppose a centered dish measures 1.2 m across and 0.190 m deep. This illustrative calculation gives F = 1.44 / 3.04 = 0.474 m, and F/D = 0.474 / 1.2 = 0.395, rounded. The nominal phase-center position is therefore about 0.474 m from the vertex along the axis. This is not a measurement of a commercial antenna.</p>
<p>Depth errors can noticeably change the answer. For a 1.2 m dish with a true depth of 0.150 m, F/D is 0.500. Reading the depth as 0.140 m gives 0.536; reading it as 0.160 m gives 0.469. Recheck the straightedge seating and repeat the depth measurement before deciding that an existing feed mount is wrong. These calculated values assume a true paraboloid and an accurately measured diameter.</p>
<h4>A practical focus-check procedure</h4>
<p>If you are replacing a feed on an existing centered dish, start by recording the reflector dimensions, operating band, polarization, and the replacement feed&#8217;s documented phase-center reference. Keep the original mounting position as a reference until you have checked the geometry.</p>
<p>Where the manufacturer permits axial adjustment, use a stable receive signal and hold pointing, polarization, and receiver settings constant. Move the feed through small, recorded axial adjustments around the predicted position, allowing the reading to settle at each step. Compare positions on both sides of the apparent peak, then secure the mount and check the reading again. Follow the equipment&#8217;s safety and installation instructions; the procedure does not require transmitting.</p>
<h3>Does the Same Method Work for Offset Dishes?</h3>
<p>Not directly. An offset reflector is an off-axis section of a parent paraboloid, so its visible center is not the parent reflector&#8217;s vertex. The ARRL treatment uses different measurements and calculations for offset geometry.<a href="https://www.arrl.org/files/file/Technology/microwave/Parabolic%20Dishes.pdf">[1]</a> Do not insert the visible width and center depth into the centered-dish formula and assume the result is the specified F/D. Use the manufacturer&#8217;s drawing and confirm how its focal ratio and feed position are defined. Dual-reflector systems likewise require their own feed-placement geometry.</p>
<p>In short, F/D describes reflector proportions, not overall antenna quality. Use it with the diameter to locate the focus, then match the feed&#8217;s phase center and illumination pattern to the reflector at the required frequency. When discussing <a href="https://www.dolphmicrowave.com/product/antenna-feeder-networks/">antenna feed-network options</a>, supply the reflector geometry and operating requirements together, rather than an F/D number alone.</p>
<div data-cta="true" style="border:1px solid #060097;border-radius:10px;padding:22px 24px;margin:28px 0;">
<p style="margin:0 0 14px;font-size:16px;line-height:1.7;color:#1e293b;">Matching a feed to a new or existing reflector? Share the reflector type, diameter, focal length or F/D, operating band, polarization, and waveguide interface to discuss compatible feedhorn and feed-network options.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;border:1px solid #060097;color:#060097;border-radius:999px;padding:10px 28px;font-size:14px;letter-spacing:0.08em;text-transform:uppercase;text-decoration:none;">Request a Technical Review</a>
</div>
<h3>References</h3>
<ol>
<li>ARRL, QST, “Parabolic Dishes.” Feed selection, phase-center positioning, and centered versus offset geometry. <a href="https://www.arrl.org/files/file/Technology/microwave/Parabolic%20Dishes.pdf">Read the original PDF</a>. Accessed November 11, 2026.</li>
<li>International Islamic University Malaysia repository, “Comparative Analysis among Satellite Parabolic Antennas.” Practical prime-focus F/D range and aperture-illumination trade-offs. <a href="https://irep.iium.edu.my/5739/1/Evaluation_of_Parabolic_Antenna_Types_and_Their_Application_in_TVRO_Systems.pdf">Read the research paper</a>. Accessed November 11, 2026.</li>
<li>R. C. Maher, Montana State University, “Parabolic Dish Microphone” (2005). Parabolic focal-length geometry; used here for the geometric equation, not RF feed-performance recommendations. <a href="https://www.montana.edu/rmaher/publications/maher_aac_0805.pdf">Read the university paper</a>. Accessed November 11, 2026.</li>
<li>University of Cape Town, “Reflector Antennas.” Focal ratio and feed-support trade-offs. <a href="https://science.uct.ac.za/sites/default/files/content_migration/science_uct_ac_za/1471/files/ReflectorAntennas.pdf">Read the course material</a>. Accessed November 11, 2026.</li>
</ol>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/dish-antenna-f-d-ratio-meaning-a6fa562b/">What Does a Dish Antenna&#8217;s F/D Ratio Mean?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Do Cassegrain and Gregorian Antennas Differ?</title>
		<link>https://www.dolphmicrowave.com/default/cassegrain-vs-gregorian-antennas-differ-01a833b1/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Wed, 11 Nov 2026 09:50:44 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9692</guid>

					<description><![CDATA[<p>Compare Cassegrain and Gregorian antenna geometry, focal paths, gain, and blockage, with a worked datasheet example and practical selection checks.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/cassegrain-vs-gregorian-antennas-differ-01a833b1/">How Do Cassegrain and Gregorian Antennas Differ?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1.webp" alt="Satellite antenna" class="wp-image-9698" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9692-1-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p><strong>A classical Cassegrain antenna uses a convex hyperboloidal subreflector before the main reflector’s prime focus; a classical Gregorian uses a concave ellipsoidal subreflector beyond it.</strong> In reception, the Gregorian’s reflected waves pass through a real intermediate focus before reaching the subreflector, while the Cassegrain intercepts them before they converge. For comparable main-reflector geometry, this generally makes the Cassegrain arrangement shorter. Neither design automatically provides higher gain, less blockage, or a wider usable field of view.</p>
<h3>How the Two Reflector Layouts Work</h3>
<p>Both designs use a main reflector and a subreflector to redirect energy to a <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feed horn</a>. In conventional centered layouts, the feed can sit near the main reflector’s vertex, giving easier receiver access than a prime-focus arrangement. The descriptions below refer to classical paraboloidal main reflectors; shaped-reflector designs need their actual surface profiles and optical drawings to be assessed.</p>
<h4>Cassegrain: intercepting the waves before focus</h4>
<p>The main reflector sends incoming parallel rays toward its prime focus. A convex hyperboloidal subreflector intercepts the converging rays and redirects them toward the feed at the secondary focus near the vertex. The rays therefore never reach the main reflector’s prime focus on this receiving path. A hole through the main reflector is one possible feed arrangement, not a defining requirement. NRAO’s radio-astronomy textbook illustrates this geometry and explains how the secondary reflector increases the effective focal ratio and allows accessible receiver placement. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<h4>Gregorian: reflecting the waves after focus</h4>
<p>The main reflector first brings the incoming rays through a real prime focus. They then diverge toward a concave ellipsoidal subreflector, which refocuses them toward the feed. Placing the subreflector beyond the prime focus generally adds axial extent compared with intercepting the rays before focus. That intermediate focal region is a genuine optical distinction, but it does not by itself guarantee better scanning, lower sidelobes, or easier calibration. NRAO presents both classical geometries together. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<p>A documented Gregorian example is the 100-m Effelsberg radio telescope. Its technical specifications list a 6.5 m ellipsoidal Gregory subreflector with 24.5 m between its focal points. This illustrates an actual implementation, not a dimensional rule for other Gregorian antennas. <a href="https://www.mpifr-bonn.mpg.de/245888/specs">[2]</a></p>
<h3>Cassegrain vs. Gregorian at a Glance</h3>
<table>
<thead><tr><th scope="col">Comparison</th><th scope="col">Classical Cassegrain</th><th scope="col">Classical Gregorian</th></tr></thead>
<tbody>
<tr><th scope="row">Subreflector</th><td>Convex hyperboloid</td><td>Concave ellipsoid</td></tr>
<tr><th scope="row">Position relative to prime focus</th><td>Before it, along the reflected receiving path</td><td>Beyond it, after the rays cross focus</td></tr>
<tr><th scope="row">Intermediate focus on the receiving path</th><td>Not reached; the converging rays are intercepted</td><td>Real focus crossed before the subreflector</td></tr>
<tr><th scope="row">Axial packaging</th><td>Generally shorter for comparable main-reflector geometry</td><td>Generally longer because the secondary lies beyond focus</td></tr>
<tr><th scope="row">Feed access</th><td>Can be near the main-reflector vertex</td><td>Can also be near the main-reflector vertex</td></tr>
<tr><th scope="row">Aperture blockage</th><td>Depends on secondary size, supports, and centered or offset layout</td><td>Depends on the same factors; not inherently greater</td></tr>
<tr><th scope="row">Gain and usable field of view</th><td>Require the actual efficiency and off-axis performance</td><td>Require the same evidence; no automatic advantage</td></tr>
<tr><th scope="row">Structural demands</th><td>Must meet pointing, deformation, and wind requirements</td><td>Must meet those requirements too; weight cannot be inferred from the name alone</td></tr>
</tbody>
</table>
<h3>Does Either Design Have Higher Gain?</h3>
<p>Not at the same aperture, wavelength, and aperture efficiency. For either design, G = &eta;(&pi;D/&lambda;)<sup>2</sup>, where G is linear gain, D is aperture diameter, &lambda; is wavelength, and &eta; is aperture efficiency. Convert to dBi using 10 log<sub>10</sub>(G). Wavelength is &lambda; = c/f, with c = 299,792,458 m/s. The aperture-area and gain relationships are described in NRAO’s antenna fundamentals. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<p>The following is a calculated illustration for a 3.7 m circular aperture at an assumed 65% efficiency, not a product specification or a comparison of measured antennas. Wavelengths are rounded for display; gain uses the unrounded values.</p>
<table>
<thead><tr><th scope="col">Frequency</th><th scope="col">Wavelength</th><th scope="col">Gain at 100% efficiency</th><th scope="col">Gain at 65% efficiency</th></tr></thead>
<tbody>
<tr><th scope="row">4 GHz</th><td>74.9 mm</td><td>43.8 dBi</td><td>41.9 dBi</td></tr>
<tr><th scope="row">6 GHz</th><td>50.0 mm</td><td>47.3 dBi</td><td>45.5 dBi</td></tr>
<tr><th scope="row">12 GHz</th><td>25.0 mm</td><td>53.4 dBi</td><td>51.5 dBi</td></tr>
<tr><th scope="row">30 GHz</th><td>10.0 mm</td><td>61.3 dBi</td><td>59.4 dBi</td></tr>
</tbody>
</table>
<p>A longer free-space ray path is not, by itself, an extra waveguide insertion loss. Compare illumination, spillover, blockage, surface accuracy, alignment, and any actual feed-network losses rather than assigning a gain penalty simply because one antenna is Gregorian.</p>
<h3>Blockage, Surface Accuracy, and Field of View</h3>
<p><strong>Centered versus offset geometry is a separate choice.</strong> A centered secondary and its supports can obstruct the aperture. An offset layout can move them outside the projected aperture; this is not a benefit exclusive to the Gregorian name. NRAO illustrates the unblocked offset Gregorian geometry of the Green Bank Telescope. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<p>For a simple uniformly illuminated aperture model, the blockage factor is approximately [1 &minus; (d/D)<sup>2</sup>]<sup>2</sup>, where d is the obstruction diameter and D is the aperture diameter. A diameter ratio of 0.10 blocks 1% of the area and gives about 0.09 dB loss in this model; a ratio of 0.15 gives about 0.20 dB. These calculated estimates exclude support struts, diffraction details, and illumination taper. They are not predicted losses for every antenna of either type.</p>
<p>For random RMS reflector-surface error &sigma;, the Ruze factor exp[&minus;(4&pi;&sigma;/&lambda;)<sup>2</sup>] estimates the efficiency reduction. It is not a model for feed misalignment or every possible structural deformation. NRAO discusses the surface-error relation and its assumptions. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<table>
<thead><tr><th scope="col">RMS surface error</th><th scope="col">Calculated gain loss</th></tr></thead>
<tbody>
<tr><th scope="row">&lambda;/100</th><td>0.07 dB</td></tr>
<tr><th scope="row">&lambda;/50</th><td>0.27 dB</td></tr>
<tr><th scope="row">&lambda;/32</th><td>0.67 dB</td></tr>
<tr><th scope="row">&lambda;/16</th><td>2.68 dB</td></tr>
</tbody>
</table>
<p>At 30 GHz, &lambda;/50 is approximately 0.2 mm RMS. That tolerance matters to either reflector layout. Likewise, a wide usable field of view depends on aberrations, focal ratio, feed arrangement, and the complete optical design. Do not use “single beam means Cassegrain” or “multiple beams mean Gregorian” as an absolute selection rule: NRAO explicitly describes multiple-feed operation with a Cassegrain system. <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[1]</a></p>
<h3>A Worked Datasheet Comparison</h3>
<p>Consider a hypothetical procurement check for a 3.7 m antenna operating at 6 GHz. Suppose two candidate datasheets quote 45.5 dBi and 45.7 dBi at the same reference plane. Using &eta; = 10<sup>G<sub>dBi</sub>/10</sup>/(&pi;D/&lambda;)<sup>2</sup>, those rounded gains imply approximately 65.6% and 68.6% aperture efficiency. The difference is 0.2 dB, or about 4.7% in linear gain. These are calculated scenario values, not vendor measurements.</p>
<p>The useful next question is not which optical name appears on the cover. Check whether the quoted gains use the same frequency, polarization, reference plane, and treatment of feed-network losses. Then compare sidelobes, cross-polarization, noise temperature under equivalent conditions, pointing accuracy, and wind-dependent performance. A small gain advantage may not resolve a requirement for low noise or tighter sidelobes.</p>
<p>A document check also matters. The published information for an <a href="https://www.dolphmicrowave.com/product/11-3-meter-earth-station-antenna/">11.3 m earth-station antenna</a> uses both Cassegrain and ring-focus wording in its optical descriptions. For that equipment, obtain the approved reflector-and-feed drawing before treating the labels as interchangeable. The drawing should establish the actual optical configuration.</p>
<h3>Which Antenna Should You Choose?</h3>
<p>For <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">satellite ground-station antennas</a>, begin with the required gain, noise performance, sidelobe envelope, frequency coverage, and site envelope. A classical Cassegrain is a useful candidate when a compact dual-reflector layout is important. A Gregorian is worth considering when its beyond-focus geometry serves the intended optical system, but the name alone does not establish superior beam quality.</p>
<ul>
<li><strong>Limited installation space:</strong> compare actual depth, moving envelope, mass, and wind ratings rather than assuming either design meets the site limits.</li>
<li><strong>Low blockage:</strong> inspect projected secondary and support obstruction, and compare centered with offset options.</li>
<li><strong>Multiple beams or scanning:</strong> request off-axis patterns, usable focal-region dimensions, and cross-polarization performance.</li>
<li><strong>High-frequency operation:</strong> verify surface accuracy, focus adjustment, pointing, and deformation limits at the operating wavelength.</li>
</ul>
<h3>The Bottom Line</h3>
<p>The defining difference is convex-before-focus versus concave-beyond-focus. Compactness often favors the classical Cassegrain arrangement, while the Gregorian supplies a real intermediate focus. Choose between actual antenna designs using their optical drawings and warranted performance, not assumed advantages attached to either name.</p>
<div data-cta="true" style="margin:28px 0;padding:20px 24px;border:1px solid #060097;border-radius:6px;text-align:center;">
<p style="margin:0 0 14px 0;font-size:17px;color:#1e293b;">Comparing dual-reflector antenna options? Send your operating band, aperture, site limits, and required RF performance to discuss the configuration.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:12px 34px;border:2px solid #060097;border-radius:4px;color:#060097;font-weight:bold;font-size:16px;text-decoration:none;">Discuss Your Antenna Requirements</a>
</div>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/cassegrain-vs-gregorian-antennas-differ-01a833b1/">How Do Cassegrain and Gregorian Antennas Differ?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Is Satellite Dish Gain Calculated?</title>
		<link>https://www.dolphmicrowave.com/default/how-is-satellite-dish-gain-calculated-1e816ede/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Wed, 11 Nov 2026 06:37:33 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9691</guid>

					<description><![CDATA[<p>Learn how satellite dish gain is calculated from diameter, frequency and efficiency, with a 1.2 m worked example and scaling rules.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/how-is-satellite-dish-gain-calculated-1e816ede/">How Is Satellite Dish Gain Calculated?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1.webp" alt="Satellite dish gain" class="wp-image-9699" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9691-1-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p>Calculate satellite dish gain with <strong>G = η × (πD/λ)²</strong>, then convert it to dBi with <strong>G_dBi = 10 log10(G)</strong>. D is the projected aperture diameter, λ is wavelength, and η is the assumed aperture efficiency expressed as a fraction <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>. With λ = c/f and c = 299,792,458 m/s, a <strong>1.2 m dish at 12 GHz and 60% efficiency gives about 41.4 dBi</strong> <a href="https://physics.nist.gov/cgi-bin/cuu/Value?c|search_for=speed+of+light">[2]</a>. This is a calculated peak gain, not a measured specification for a particular antenna.</p>
<h3>Gain Formula</h3>
<p>For a circular parabolic dish, use these equations with D and λ in meters and frequency f in hertz <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>:</p>
<p><strong>λ = c/f</strong><br><strong>G_linear = η × (πD/λ)²</strong><br><strong>G_dBi = 10 log10(G_linear)</strong></p>
<ul>
<li><strong>D</strong> is the diameter corresponding to the projected collecting aperture, not automatically the reflector&#8217;s longest rim dimension. A size class such as Dolph&#8217;s <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">1.2 m quick-deploy flyaway antenna</a> is only the starting point; confirm the aperture definition before calculating.</li>
<li><strong>λ</strong> is the free-space wavelength at the specific transmit or receive frequency. Convert GHz to Hz by multiplying by 1,000,000,000 before using λ = c/f.</li>
<li><strong>η</strong> accounts for the reduction from the ideal aperture result on the stated calculation basis. Enter 60% as 0.60, not 60. The cited university text gives 0.55–0.60 as typical values, not a guarantee for every dish <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>.</li>
</ul>
<p>dBi expresses gain relative to an isotropic radiator. The dish concentrates radiation in a direction; it does not create transmitter power. Aperture efficiency is effective collecting area divided by geometric aperture area. Illumination taper reduces that effective area, which is why physical size alone cannot establish the gain <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[3]</a>.</p>
<h3>Find Wavelength First</h3>
<p>The following wavelengths use the exact vacuum speed of light, 299,792,458 m/s <a href="https://physics.nist.gov/cgi-bin/cuu/Value?c|search_for=speed+of+light">[2]</a>. Retain unrounded values in the calculation and round only the final gain.</p>
<table>
<thead><tr><th scope="col">Frequency</th><th scope="col">Wavelength in meters</th><th scope="col">Wavelength in millimeters</th></tr></thead>
<tbody>
<tr><td>4 GHz</td><td>0.074948</td><td>74.948</td></tr>
<tr><td>12 GHz</td><td>0.024983</td><td>24.983</td></tr>
<tr><td>20 GHz</td><td>0.014990</td><td>14.990</td></tr>
<tr><td>30 GHz</td><td>0.009993</td><td>9.993</td></tr>
</tbody>
</table>
<p>Do not divide a diameter in meters by a wavelength in millimeters. A factor-of-1,000 error in D/λ changes the calculated gain by 20 log10(1,000), or 60 dB. Entering 60 instead of 0.60 for efficiency produces a different error: 10 log10(100), or 20 dB too much gain.</p>
<h3>Worked Calculation</h3>
<p>Use a circular 1.2 m projected aperture, f = 12 GHz, and η = 0.60. These are illustration inputs, not a claim about a product&#8217;s measured efficiency. The calculation follows the aperture-gain equation <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>.</p>
<h4>Calculate Wavelength</h4>
<p>λ = 299,792,458 / 12,000,000,000 = 0.0249827048 m, approximately 25 mm.</p>
<h4>Calculate Linear Gain</h4>
<p>πD/λ = π × 1.2 / 0.0249827048 ≈ 150.9008. Squaring this value gives about 22,771.06. Multiplying by 0.60 gives G_linear ≈ 13,662.64.</p>
<h4>Convert To dBi</h4>
<p>10 log10(13,662.64) ≈ 41.3553 dBi. Report this as 41.36 dBi when showing the arithmetic, or about 41.4 dBi for an estimate with assumed efficiency.</p>
<h4>Record The Basis</h4>
<blockquote><p>Calculated peak gain: about 41.4 dBi at 12 GHz, with a 1.2 m circular projected aperture and assumed aperture efficiency of 60%, in the far field. No additional external feedline loss or pointing loss has been applied.</p></blockquote>
<p>Keep that basis with the number. If a supplier&#8217;s efficiency already includes a loss term, do not subtract the same loss again.</p>
<h3>Gain By Size And Frequency</h3>
<p>Every row below uses G = 0.60 × (πDf/c)² with the same exact value of c. All gains are rounded to one decimal place. They are calculated examples, not measured product values; holding efficiency at 60% across frequencies does not establish that a physical antenna operates across those bands <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a> <a href="https://physics.nist.gov/cgi-bin/cuu/Value?c|search_for=speed+of+light">[2]</a>.</p>
<table>
<thead><tr><th scope="col">Projected diameter</th><th scope="col">Frequency</th><th scope="col">Assumed efficiency</th><th scope="col">Calculated gain</th></tr></thead>
<tbody>
<tr><td>0.6 m</td><td>12 GHz</td><td>60%</td><td>35.3 dBi</td></tr>
<tr><td>0.9 m</td><td>12 GHz</td><td>60%</td><td>38.9 dBi</td></tr>
<tr><td>1.2 m</td><td>12 GHz</td><td>60%</td><td>41.4 dBi</td></tr>
<tr><td>1.8 m</td><td>12 GHz</td><td>60%</td><td>44.9 dBi</td></tr>
<tr><td>1.2 m</td><td>4 GHz</td><td>60%</td><td>31.8 dBi</td></tr>
<tr><td>2.4 m</td><td>4 GHz</td><td>60%</td><td>37.8 dBi</td></tr>
<tr><td>3.7 m</td><td>4 GHz</td><td>60%</td><td>41.6 dBi</td></tr>
<tr><td>1.2 m</td><td>20 GHz</td><td>60%</td><td>45.8 dBi</td></tr>
<tr><td>1.2 m</td><td>30 GHz</td><td>60%</td><td>49.3 dBi</td></tr>
</tbody>
</table>
<p>The 3.7 m row illustrates an aperture class also found in Dolph&#8217;s <a href="https://www.dolphmicrowave.com/product/3-7-4-5-meter-prime-focus-antenna/">3.7/4.5 m prime-focus antenna systems</a>. Use the specific model&#8217;s operating frequency and documented gain or efficiency to evaluate the actual antenna.</p>
<h3>Choose An Efficiency Assumption</h3>
<p>If no applicable efficiency is available, state an assumption and show its sensitivity. Here, 55% and 60% sit within the cited textbook&#8217;s typical range; 65% and 70% are comparison scenarios, not promised performance <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>.</p>
<table>
<thead><tr><th scope="col">Assumed efficiency</th><th scope="col">Gain at 1.2 m and 12 GHz</th><th scope="col">Change from 60%</th></tr></thead>
<tbody>
<tr><td>55%</td><td>40.98 dBi</td><td>−0.38 dB</td></tr>
<tr><td>60%</td><td>41.36 dBi</td><td>0 dB</td></tr>
<tr><td>65%</td><td>41.70 dBi</td><td>+0.35 dB</td></tr>
<tr><td>70%</td><td>42.02 dBi</td><td>+0.67 dB</td></tr>
</tbody>
</table>
<p>Calculated from unrounded values, the 55%–70% efficiency span is 10 log10(0.70/0.55) ≈ 1.05 dB. <strong>The 60% result is not a theoretical ceiling.</strong> It is one efficiency scenario. Surface accuracy, aperture blockage, illumination and spillover affect performance, and their influence must be reflected in the efficiency or in explicitly separate correction terms, without double counting <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[3]</a>.</p>
<h3>How Size And Frequency Change Gain</h3>
<p>At unchanged efficiency, doubling diameter adds 20 log10(2) ≈ 6.02 dB. Doubling frequency gives the same increase because wavelength halves. These are conditional scaling rules, not a guarantee that the same feed and reflector retain their efficiency at another frequency.</p>
<p>For example, increasing diameter from 0.9 m to 1.2 m at 12 GHz adds 20 log10(1.2/0.9) ≈ 2.50 dB. Increasing frequency from 4 GHz to 12 GHz at fixed diameter adds 20 log10(3) ≈ 9.54 dB. Calculate these differences before rounding individual gain values.</p>
<h3>A Gain Discrepancy To Work Through</h3>
<p>Suppose you are comparing <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM antennas</a> and need to understand a hypothetical 40.0 dBi specification for a 1.2 m aperture at 12 GHz. The 60% example above gives 41.36 dBi, a difference of about 1.36 dB. This is a calculation exercise, not a reported customer case or field test.</p>
<p>Rearrange the same equation: <strong>η = 10^(G_dBi/10) / (πD/λ)²</strong>. With 40.0 dBi, 1.2 m and 12 GHz, η ≈ 0.439, or 43.9%, on the same gain basis. That does not diagnose a faulty dish; it identifies the efficiency implied by the stated inputs.</p>
<p>Before comparing the two figures, ask whether both refer to the same frequency, projected aperture, peak direction and reference plane. Check whether the quoted gain includes feed-network losses. A <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">microwave feedhorn</a> is part of the illumination system, so its compatibility with the reflector matters; diameter alone does not settle the comparison. If these definitions are unavailable, keep the result as an estimate rather than declaring either figure wrong.</p>
<h3>Keep Gain And Link Losses Separate</h3>
<p>The aperture equation gives a peak-gain estimate on the efficiency basis you choose. It does not independently calculate pointing loss, atmospheric attenuation, or every component loss. NRAO distinguishes gain from directivity when dissipative losses are present and discusses how surface and tracking errors reduce antenna performance <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[3]</a>.</p>
<p>Choose a reference plane before making a link budget. If gain is specified at the antenna feed input, losses in an upstream <a href="https://www.dolphmicrowave.com/product/omt-orthogonal-mode-transducer/">OMT</a>, <a href="https://www.dolphmicrowave.com/product/waveguide-diplexer/">waveguide diplexer</a>, or other <a href="https://www.dolphmicrowave.com/product/antenna-feeder-networks/">antenna feeder network</a> may need separate treatment. If the quoted assembly gain already includes those components, subtracting their losses again would understate performance.</p>
<p>For transmit power referenced ahead of a separately budgeted feeder, EIRP_dBW = P_tx_dBW − L_feed_dB + G_antenna_dBi. A 10 W transmitter is 10 dBW; with 41.36 dBi antenna gain and zero additional feeder loss, EIRP is about 51.36 dBW. An illustrative 1 dB feeder loss reduces it to about 50.36 dBW. Increasing transmitter power changes EIRP, not the dish&#8217;s gain <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>.</p>
<p>Do not infer an exact half-power beamwidth or pointing tolerance from the gain number alone. Beam shape depends on aperture illumination, and a half-power beamwidth is not interchangeable with a first-null angle. Use a specified or measured radiation pattern for pointing-loss calculations <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[3]</a>.</p>
<h3>Check Before Using The Result</h3>
<ul>
<li><strong>Confirm projected area.</strong> For an elliptical projected aperture with full axes 1.2 m and 1.0 m, the area is 1.0/1.2 of a 1.2 m circle. At the same frequency and efficiency, that means 10 log10(1.0/1.2) ≈ −0.79 dB. Do not apply this correction to an offset reflector merely because its physical rim looks oval; establish the projected aperture first.</li>
<li><strong>Use the actual frequency and gain basis.</strong> A transmit-band gain is not automatically the receive-band gain. Compare peak gain with peak gain, and keep component losses and mismatch treatment consistent.</li>
<li><strong>Check patterns separately from peak gain.</strong> ITU publishes reference patterns for earth-station coordination and interference assessment <a href="https://www.itu.int/en/ITU-R/software/pages/ant-pattern.aspx">[4]</a>. Recommendation ITU-R S.465-6 covers 2–31 GHz and is listed as in force; it is a reference-pattern recommendation, not an efficiency specification for an individual dish <a href="https://www.itu.int/rec/R-REC-S.465/en">[5]</a>.</li>
<li><strong>Use the applicable filing requirements.</strong> FCC 47 CFR 25.209 addresses earth-station antenna performance standards. Check the provisions applicable to the operating band and antenna arrangement rather than treating a calculated peak dBi value as proof of compliance <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">[6]</a>.</li>
</ul>
<div data-cta="true" style="margin:28px 0 8px;padding:20px 22px;border:1px solid #8D1616;border-radius:10px;text-align:center;">
<p style="margin:0 0 6px;font-size:16px;line-height:1.6;color:#1d1e22;">Planning a dish around a target gain?</p>
<p style="margin:0 0 14px;font-size:14px;line-height:1.6;color:#5d6066;">Share frequency, aperture size, and assumed efficiency for an engineering review of your link.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:10px 26px;border:1px solid #8D1616;border-radius:6px;color:#8D1616;font-size:15px;font-weight:600;text-decoration:none;letter-spacing:.02em;">Request Engineering Review</a>
</div>
<h3>Short Answer</h3>
<p>Find wavelength from λ = c/f, calculate G = η × (πD/λ)², then take 10 log10(G) to get dBi <a href="https://pressbooks-dev.oer.hawaii.edu/epet302/chapter/9-6-link-budget/">[1]</a>. A 1.2 m circular aperture at 12 GHz and 60% efficiency gives about 41.4 dBi. Keep the frequency, projected size, efficiency and loss basis attached to that figure; those inputs determine whether it is useful in a real comparison.</p>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/how-is-satellite-dish-gain-calculated-1e816ede/">How Is Satellite Dish Gain Calculated?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Do You Size a Dish for a Satellite Link?</title>
		<link>https://www.dolphmicrowave.com/default/size-dish-satellite-link-698619a2/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Tue, 10 Nov 2026 09:38:32 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9686</guid>

					<description><![CDATA[<p>Size a satellite dish from the link budget: calculate gain and diameter, allow for rain, and compare candidate sizes with a worked 12 GHz example.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/size-dish-satellite-link-698619a2/">How Do You Size a Dish for a Satellite Link?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen.webp" alt="How Do You Size a Dish for a Satellite Link?" class="wp-image-9687" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9686-gen-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p>Short answer: size a satellite dish from the link budget, not the frequency band alone. Calculate the receive gain needed to meet the modem threshold after path losses and availability margin, then convert that gain to diameter with D = (λ/π) × √(G/η), using linear gain G and aperture efficiency η. Select a standard size that meets that requirement and, for a two-way terminal, also passes the uplink budget. The 12 GHz example below needs about 1.3 m before rain margin; it is not a universal Ku-band size. Free-space loss is the starting point, not the complete budget <a href="https://www.itu.int/rec/R-REC-P.525/en">[1]</a>.</p>
<h3>What Sets the Dish Size You Need</h3>
<p>Start with frequency, satellite EIRP at the site, data rate and modem threshold, receiver noise, availability target, path geometry, and operating constraints. At fixed frequency and efficiency, an extra 3 dB of antenna gain requires about 41% more diameter. Band and data rate alone are not enough to select a dish.</p>
<h4>Frequency band</h4>
<p>At an assumed 60% aperture efficiency, a 1.2 m dish has a calculated gain of about 41.4 dBi at 12 GHz and 45.8 dBi at 20 GHz. Free-space loss also rises by about 4.4 dB between those frequencies. Higher gain alone therefore does not establish a smaller required dish. Evaluate the actual EIRP, receiver noise and propagation conditions on each link; use Earth-space prediction methods for the site-specific atmospheric effects <a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a>.</p>
<h4>Satellite and coverage</h4>
<p>Use the operator&#8217;s EIRP contour at your coordinates, for the relevant beam and carrier operating conditions, rather than the beam-peak brochure value. A 3 dB reduction in available EIRP requires 3 dB more receive gain if everything else stays fixed. That correction can change the selected diameter even though the service and frequency have not changed.</p>
<h4>Service and data rate</h4>
<p>With the same modulation, coding and required energy per bit relative to noise density, doubling bit rate requires about 3 dB more carrier power if noise density is unchanged. A change of modulation or coding can change that requirement. Use the modem&#8217;s specified threshold, bandwidth and implementation allowance rather than assuming every faster service needs the same gain increase.</p>
<h4>Availability target</h4>
<p>On a 365-day basis, 99.9% availability allows about 8.8 hours of outage per year; 99.5% allows 43.8 hours. These are outage allowances, not predictions of actual downtime. Decide how much of the service outage budget belongs to propagation rather than equipment or network failures, then calculate the atmospheric allowance for that target <a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a>.</p>
<h4>Path geometry</h4>
<p>For a GEO geometry calculation with a spherical Earth radius of 6,378 km and orbital radius of 42,164 km, the overhead distance is 35,786 km. Slant range is about 38,612 km at 30° elevation, 40,586 km at 10°, and 41,127 km at 5°. Those distances add approximately 0.66, 1.09 and 1.21 dB of free-space loss relative to overhead. Atmospheric effects must be calculated separately; these distance-only penalties do not describe the full low-elevation link <a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a>.</p>
<h4>Regulatory limits</h4>
<p>A transmit antenna must meet the applicable radiation-pattern requirements as well as its on-axis gain target. For example, U.S. 47 CFR 25.209 specifies earth-station antenna performance envelopes for defined services and bands; the 2025 annual edition documents those requirements. It is not a universal minimum-diameter rule. Confirm the current rules, authorization and operator acceptance requirements for the proposed terminal before ordering <a href="https://www.govinfo.gov/content/pkg/CFR-2025-title47-vol2/pdf/CFR-2025-title47-vol2-sec25-209.pdf">[3]</a>.</p>
<h3>The Sizing Workflow</h3>
<h4>Define the service requirement</h4>
<p>List carrier bandwidth, modulation and coding, the needed carrier-to-noise ratio, and the uptime target (99.5% or 99.9% across the year serve as common examples). The modem specification and the service contract supply them.</p>
<h4>Collect satellite, site and receiver data</h4>
<p>Record satellite EIRP at the site, uplink and downlink frequencies, polarization, coordinates, altitude, elevation angle, and receiver system noise temperature or noise figure. For a two-way budget, also obtain satellite receive G/T and the terminal amplifier&#8217;s usable output power. Frequency and polarization affect the specific rain attenuation coefficients; those coefficients are inputs to a path prediction, not the complete rain fade by themselves <a href="https://www.itu.int/rec/R-REC-P.838/en">[4]</a>.</p>
<h4>Calculate path and hardware losses</h4>
<p>Work from free-space loss first <a href="https://www.itu.int/rec/R-REC-P.525/en">[1]</a>:</p>
<p>FSPL = 20log10(4πd/λ)</p>
<p>where d is the path distance and λ is the wavelength in the same units. With distance in km and frequency in GHz the working form reads:</p>
<p>FSPL = 20log10(d) + 20log10(f) + 92.45 (dB)</p>
<p>Add the remaining terms from models and measured hardware data:</p>
<ul>
<li>Rain attenuation and relevant scintillation effects, combined according to the applicable prediction method rather than by adding unrelated worst cases <a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a>.</li>
<li>Gaseous absorption and cloud attenuation <a href="https://www.itu.int/rec/R-REC-P.676/en">[5]</a> <a href="https://www.itu.int/rec/R-REC-P.840/en">[6]</a>.</li>
<li>Feed and <a href="https://www.dolphmicrowave.com/product-category/waveguide-components/">waveguide</a> losses</li>
<li>Pointing and polarization mismatch losses</li>
</ul>
<p>Record the value, source and reference plane of each loss. Do not subtract a feed loss separately if it is already included in the antenna gain or receiver specification being used.</p>
<h4>Find the required antenna gain</h4>
<p>Received power = EIRP − path losses + receive antenna gain</p>
<p>Use dBW for both power terms, dB for losses and dBi for gain, all at consistent reference planes. Rearranging gives:</p>
<p>Required gain (dBi) = required received carrier power (dBW) − EIRP (dBW) + total losses (dB) + any separately allocated reserve (dB).</p>
<p>If the modem specifies C/N rather than received power, first calculate receiver noise over the stated noise bandwidth. Alternatively, use a consistent G/T-based budget, where G/T is antenna gain relative to system noise temperature. Include the availability-related attenuation once, and keep any additional implementation or aging reserve explicit. A larger dish does not remedy every source of service outage.</p>
<h4>Convert gain to diameter</h4>
<p>A parabolic reflector obeys:</p>
<p>G = η × (πD/λ)² (linear), or in decibels: GdBi = 10log10(G)</p>
<p>Here D and λ use the same length units. For this circular-aperture sizing model, η is aperture efficiency; 0.60 is an assumption used in the calculations below, not a guaranteed product specification. Obtain the antenna&#8217;s actual gain or efficiency at the operating frequency. Other aperture shapes and scanned arrays need their own effective-area and scan-loss treatment.</p>
<p>D = (λ/π) × √(G/η)</p>
<p>If the budget result is in dBi, convert it first: G = 10^(GdBi/10). Substituting a dBi number directly into the square root produces the wrong diameter.</p>
<h4>Select a standard size and verify it</h4>
<p>Select the next available size that meets the fully margined requirement, then repeat the budget with its specified gain. Product families such as <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">1.2 m quick-deploy terminals</a> and larger <a href="https://www.dolphmicrowave.com/satcom-antenna/">earth-station antennas</a> serve different installation needs; diameter alone does not establish compatibility. Check the relevant band and configuration within the <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM antenna range</a>, then verify:</p>
<ul>
<li>Does the transmit side still meet its EIRP with your available amplifier?</li>
<li>Do the mount and foundation suit the wind load?</li>
<li>Can your pointing accuracy hold a beam that narrows as the dish grows?</li>
</ul>
<h3>A Ku-Band Worked Example</h3>
<blockquote>
<p>This is a calculation example with stated assumptions, not a measurement or a guarantee for any site.</p>
</blockquote>
<p>Consider a GEO downlink at 12 GHz directly beneath the satellite. Distance equals the standard 35,786 km and λ stands near 0.025 m. Free-space loss becomes:</p>
<p>FSPL = 20log10(35,786) + 20log10(12) + 92.45 ≈ 91.08 + 21.58 + 92.45 ≈ 205.1 dB <a href="https://www.itu.int/rec/R-REC-P.525/en">[1]</a></p>
<p>Assume 50 dBW satellite EIRP at the site, a required carrier power of −115 dBW at a defined receiver input, and 2 dB of combined clear-sky atmospheric and hardware losses to that input. The carrier threshold is an assumed input, not a modem specification. The 2 dB excludes rain attenuation and additional reserve. The clear-sky requirement becomes:</p>
<p>Required gain = −115 − 50 + 205.1 + 2 ≈ 42.1 dBi.</p>
<p>The linear gain is about 16,200. At 60% efficiency, D = (0.025/π) × √(16,200/0.60) ≈ 1.3 m before rain margin.</p>
<h4>What changes when margin is added?</h4>
<p>Suppose the same illustrative budget requires another 3 dB in total for rain attenuation and reserve. This is an assumed sensitivity check, not a weather prediction. The gain target becomes about 45.1 dBi and the calculated diameter about 1.85 m. Under the same efficiency assumption, a 1.8 m dish gives 44.9 dBi and falls short; a 2.4 m dish gives 47.4 dBi and exceeds the target by about 2.3 dB. This is why rounding the clear-sky result to 1.8 m is not enough to approve the link.</p>
<p>For an actual purchase, replace the assumed 3 dB with the site&#8217;s propagation result and allocated reserve, use the candidate antenna&#8217;s specified gain, and check the uplink separately. Keep the EIRP contour, modem threshold, loss allocation and antenna specification with the calculation so another engineer can reproduce the selection.</p>
<h3>How Band Choice Changes the Size You Need</h3>
<p>Read the table below as a sizing warning: it assumes the standard 35,786 km GEO distance with 60% efficiency <a href="https://www.itu.int/rec/R-REC-P.525/en">[1]</a>:</p>
<table>
<thead>
<tr><th>Band (example frequency)</th><th>Free-space loss</th><th>1.2 m dish gain</th></tr>
</thead>
<tbody>
<tr><td>C (4 GHz)</td><td>~195.6 dB</td><td>~31.8 dBi</td></tr>
<tr><td>X (8 GHz)</td><td>~201.6 dB</td><td>~37.8 dBi</td></tr>
<tr><td>Ku downlink (12 GHz)</td><td>~205.1 dB</td><td>~41.4 dBi</td></tr>
<tr><td>Ku uplink (14 GHz)</td><td>~206.5 dB</td><td>~42.7 dBi</td></tr>
<tr><td>Ka downlink (20 GHz)</td><td>~209.5 dB</td><td>~45.8 dBi</td></tr>
<tr><td>Ka uplink (30 GHz)</td><td>~213.1 dB</td><td>~49.3 dBi</td></tr>
</tbody>
</table>
<p>For fixed satellite EIRP, distance, receive diameter and efficiency, the frequency-dependent gain increase cancels the free-space-loss increase in this simplified comparison. The table does not prove that Ka-band always needs a larger dish or that the highest frequency sets the size. Actual beam EIRP, noise, service threshold, atmospheric attenuation and transmit constraints decide which budget is limiting <a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a>.</p>
<h3>What Size Matches Your Gain Target at 12 GHz</h3>
<p>These are calculated gains at 12 GHz and 60% efficiency, not measured product data. Choose a row at or above your fully margined gain target, then verify the candidate&#8217;s specified performance. The gain difference is relative to a 1.2 m dish, not a site-specific rain allowance.</p>
<table>
<thead>
<tr><th>Dish diameter</th><th>Calculated gain (dBi)</th><th>Gain relative to 1.2 m</th></tr>
</thead>
<tbody>
<tr><td>0.6 m</td><td>~35.3</td><td>−6.0 dB</td></tr>
<tr><td>0.9 m</td><td>~38.9</td><td>−2.5 dB</td></tr>
<tr><td>1.2 m</td><td>~41.4</td><td>0.0 dB</td></tr>
<tr><td>1.8 m</td><td>~44.9</td><td>+3.5 dB</td></tr>
<tr><td>2.4 m</td><td>~47.4</td><td>+6.0 dB</td></tr>
<tr><td>3.7 m</td><td>~51.1</td><td>+9.8 dB</td></tr>
</tbody>
</table>
<p>Doubling diameter adds about 6 dB at unchanged efficiency. That is a gain increase, not a guarantee of a particular availability level.</p>
<h3>Sizing Checks Buyers Often Skip</h3>
<p>A rough full half-power beamwidth estimate is 70λ/D degrees; the coefficient depends on illumination. At 12 GHz it gives about 1.5° for a 1.2 m dish and 0.7° for a 2.4 m dish. This is beamwidth, not an allowable pointing error. Compare the actual pattern with installation accuracy, wind deflection and any tracking requirement.</p>
<p>The <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feed horn</a> affects illumination and aperture efficiency, while losses in the waveguide chain depend on the hardware and reference plane. Check those specifications separately. For <a href="https://www.dolphmicrowave.com/custom-antenna-feed-systems/">custom antenna feed systems</a>, confirm feed-to-reflector compatibility rather than assuming a matching change will recover a fixed number of decibels.</p>
<p>C-band smoothness does not guarantee Ka-band service. Small surface errors scatter power from the main beam at short wavelengths. Rate the antenna by its specified band as well as diameter, or the dish underperforms its nameplate size.</p>
<p>On a two-way link, check usable amplifier power, transmit feeder loss and antenna gain together against the uplink requirement and applicable limits. If future capacity matters, budget that future service explicitly; an arbitrary extra size is not a substitute for calculating the requirement.</p>
<h3>The Short Answer to Keep</h3>
<blockquote>
<p>Choose the smallest standard dish that meets the fully margined receive and transmit budgets, required antenna patterns, and installation constraints. Keep the assumptions with the result: without the site EIRP, receiver threshold, propagation allowance and actual antenna gain, a diameter is only a preliminary estimate.</p>
</blockquote>
<div data-cta="true" style="text-align:center;margin:36px 0 8px;">
<p style="color:#54595F;font-size:13px;letter-spacing:0.6px;margin:0 0 10px;">Sizing a link now? Send your band, site, and uptime target.</p>
<p style="margin:0;"><a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;color:#1a7efb;border:1px solid #1a7efb;border-radius:4px;padding:11px 30px;font-size:15px;font-weight:600;letter-spacing:0.4px;text-decoration:none;">Request a Link-Budget Review</a></p>
</div>
<p><a href="https://www.itu.int/rec/R-REC-P.525/en">[1]</a> ITU-R P.525, Calculation of free-space attenuation (P.525-5 in force).</p>
<p><a href="https://www.itu.int/rec/R-REC-P.618/en">[2]</a> ITU-R P.618, Propagation data and prediction methods for Earth-space systems (P.618-14 in force).</p>
<p><a href="https://www.govinfo.gov/content/pkg/CFR-2025-title47-vol2/pdf/CFR-2025-title47-vol2-sec25-209.pdf">[3]</a> U.S. Government Publishing Office, 47 CFR 25.209, Earth station antenna performance standards, 2025 annual edition.</p>
<p><a href="https://www.itu.int/rec/R-REC-P.838/en">[4]</a> ITU-R P.838, Specific attenuation model for rain (P.838-3).</p>
<p><a href="https://www.itu.int/rec/R-REC-P.676/en">[5]</a> ITU-R P.676, Attenuation by atmospheric gases and related effects (P.676-13).</p>
<p><a href="https://www.itu.int/rec/R-REC-P.840/en">[6]</a> ITU-R P.840, Attenuation due to clouds and fog (P.840-9).</p>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/size-dish-satellite-link-698619a2/">How Do You Size a Dish for a Satellite Link?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Which Satellite Antenna Type Fits Your Application?</title>
		<link>https://www.dolphmicrowave.com/default/which-satellite-antenna-type-fits-your-application-2de39f98/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Tue, 10 Nov 2026 09:31:36 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9685</guid>

					<description><![CDATA[<p>Fixed, tracking, gateway, or compact? Match the satellite antenna type to your application by orbit, band, gain, and approval rules, with worked calculation examples.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/which-satellite-antenna-type-fits-your-application-2de39f98/">Which Satellite Antenna Type Fits Your Application?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen.webp" alt="Which Satellite Antenna Type Fits Your Application?" class="wp-image-9688" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9685-gen-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p><strong>For a fixed site using a geostationary satellite, start with a fixed parabolic dish. For broadband while moving, or a directional link to LEO/MEO satellites, use an operator-approved electronically steered panel or a mechanically tracking dish.</strong> Large gateways often use dual-reflector dishes; handheld and low-rate services may use compact patch, helical, or omnidirectional antennas. The right choice depends on the service first, then motion, required link performance, and installation limits—not the antenna shape alone.</p>
<h3>Five Fit Decisions</h3>
<ol>
<li><strong>Separate site motion from satellite motion.</strong> A fixed GEO site can retain one alignment. A fixed LEO/MEO site may still need tracking; a moving platform also needs motion compensation for a narrow-beam link. Broad-beam low-rate terminals do not necessarily need continuous antenna steering.</li>
<li><strong>Identify the orbit.</strong> Geostationary satellites orbit above the equator at about 35,786 km and appear stationary to a ground observer. NASA places LEO at approximately 160–2,000 km and MEO at approximately 2,000–35,500 km. <a href="https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/orbits">[1]</a> Geostationary orbit is a special case of geosynchronous orbit; an inclined geosynchronous satellite does not stay at a fixed point in the sky. <a href="https://www.esa.int/Enabling_Support/Space_Transportation/Types_of_orbits">[2]</a></li>
<li><strong>Use exact operating frequencies.</strong> ESA lists broad letter-band ranges including C at 4–8 GHz, Ku at 12–18 GHz, and Ka at 26–40 GHz. These names are not substitutes for the service’s licensed receive and transmit ranges. Higher-frequency services typically offer wider bandwidth but are more susceptible to rain fade. <a href="https://www.esa.int/Applications/Connectivity_and_secure_communications/Satellite_frequency_bands">[3]</a> Use site rainfall, elevation angle, frequency, and polarization with an Earth-space propagation method such as ITU-R P.618-14 to estimate attenuation and the required fade margin. <a href="https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.618-14-202308-I!!PDF-E.pdf">[4]</a></li>
<li><strong>Size for the link budget.</strong> Compare warranted receive performance, transmit performance, and beamwidth at the actual operating frequencies. The calculated examples below show how diameter and frequency affect gain; they are not product specifications.</li>
<li><strong>Check installation and interference limits.</strong> Include height, weight, power, cooling, wind loading, and mounting constraints. In the US, 47 CFR 25.209 sets earth-station antenna performance requirements that depend on the applicable band, polarization, and angular region; one envelope term is 29 − 25 log<sub>10</sub>(θ), with θ in degrees. It is not a universal mask for every antenna. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">[5]</a></li>
</ol>
<h3>Antenna Types Compared</h3>
<h4>Fixed parabolic dish</h4>
<p>A fixed parabolic dish fits stationary GEO television, broadband, and enterprise links. An offset-fed design keeps the feed out of the main aperture. Select its diameter from the operator’s approved options and the site link budget, rather than assuming every home or VSAT link needs the same size. The mount must retain alignment under the specified environmental conditions.</p>
<h4>Dual-reflector dish</h4>
<p>Cassegrain and Gregorian layouts use a sub-reflector and are candidates for gateways and teleports requiring high gain and carefully controlled patterns. Dolph’s catalogue includes an <a href="https://www.dolphmicrowave.com/product/11-3-meter-earth-station-antenna/">11.3 m earth-station antenna</a> within its <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">SATCOM antenna</a> range. Diameter and reflector layout alone do not establish noise performance, sidelobe compliance, or suitability for a particular operator.</p>
<h4>VSAT system</h4>
<p>VSAT—very small aperture terminal—is a terminal class, not a separate reflector shape. A two-way installation needs an antenna, compatible <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feed</a>, mount, transmit and receive RF equipment, and modem. For a stationary GEO service, a fixed dish is a natural starting point. Confirm the complete terminal configuration with the operator, including frequencies and polarization, before comparing aperture sizes.</p>
<h4>Electronically steered flat panel</h4>
<p>An electronically steered panel changes beam direction without rotating the whole antenna. It fits applications where profile, retargeting, or motion compensation matter, provided the network supports that terminal. Compare warranted equivalent isotropically radiated power (EIRP) and receive gain-to-noise-temperature ratio (G/T) across the required scan range, not just broadside gain. Include power draw, cooling, obstructions, and radome losses.</p>
<h4>Mechanically tracking and stabilized dishes</h4>
<p>A mechanically tracking reflector follows a moving satellite; a stabilized installation also compensates for platform motion. Those are distinct requirements. For fixed-site non-GEO work, <a href="https://www.dolphmicrowave.com/product/low-medium-earth-orbit-satellite-tracking-antenna/">X/Y-axis LEO/MEO tracking antennas</a> are one configuration to investigate. A ship or aircraft needs an installation specifically rated for its motion environment. Confirm tracking rate, pointing accuracy, acquisition, and network handover behavior separately.</p>
<h4>Horn feed and reference</h4>
<p>Horns illuminate reflectors and serve as test sources or <a href="https://www.dolphmicrowave.com/product/standard-gain-horn-antenna/">standard-gain references</a>. For the broadband ground-terminal applications discussed here, a horn is normally a feed or measurement component rather than an alternative to the complete dish or panel. Whether any antenna can close a particular satellite link remains a link-budget question.</p>
<h4>Compact low-rate antennas</h4>
<p>Compact patches, helices, and omnidirectional antennas can suit handheld or low-rate services when their coverage and polarization match the network. Directional helices and Yagis can provide more gain, but may need pointing or tracking; they should not all be treated as broad-beam antennas. Choose the pattern to suit the link’s pointing constraints, rather than grouping every portable antenna under one rule.</p>
<h3>Application Match</h3>
<p>Find your application in the left column, then read across for the fit and the reason. If two rows seem to fit, the orbit and motion rows decide before size does.</p>
<table>
<thead>
<tr><th>Application</th><th>Usually the right fit</th><th>Why</th></tr>
</thead>
<tbody>
<tr><td>Fixed GEO television or home broadband</td><td>Operator-compatible fixed dish</td><td>Stationary geometry permits fixed pointing; link budget and availability target set size</td></tr>
<tr><td>Fixed GEO enterprise VSAT</td><td>Approved dish, RF chain, and modem</td><td>Two-way service requires a compatible complete terminal, not just a reflector</td></tr>
<tr><td>Large gateway, teleport, or earth station</td><td>Large <a href="https://www.dolphmicrowave.com/product/3-7-4-5-meter-dual-reflector-earth-station-antennas-system/">dual-reflector dish</a> on solid foundation</td><td>High gain, low noise, sidelobes controlled toward adjacent satellites</td></tr>
<tr><td>Broadband while a ship, aircraft, or vehicle is moving</td><td>Motion-rated stabilized dish or electronically steered panel</td><td>Maintains a directional beam despite platform motion; network approval still applies</td></tr>
<tr><td>Directional LEO/MEO broadband at a fixed or moving site</td><td>Network-supported electronic or mechanical tracking terminal</td><td>Satellite motion requires beam management; the antenna and network must handle acquisition and handover</td></tr>
<tr><td>News, rescue, or field operation after stopping</td><td><a href="https://www.dolphmicrowave.com/product/1-2-1-5-1-8-2-4-meter-vehicle-mounted-driveaway-sng-antenna/">Driveaway SNG antenna</a> or <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">quick-deploy dish</a></td><td>Transport, stop, deploy, and acquire; driveaway does not establish communication while driving</td></tr>
<tr><td>Laboratory, range, or feed development</td><td>Standard-gain horn as feed or reference</td><td>Known pattern and gain for measurement or dish illumination</td></tr>
<tr><td>Handheld or low-rate service</td><td>Network-compatible compact patch, helical, or omni</td><td>Coverage, polarization, and link budget determine whether rough pointing is acceptable</td></tr>
</tbody>
</table>
<h3>Orbit and Tracking</h3>
<p>A stationary building does not imply a stationary beam: a directional LEO/MEO terminal must follow the satellite even when its mount never moves geographically. Conversely, a vehicle used only after parking may use a deployable GEO dish rather than a communications-on-the-move system. Dolph’s driveaway product description explicitly distinguishes deployment after transport from operation while driving.</p>
<p>Free-space basic transmission loss between isotropic antennas is Lbf = 20 log<sub>10</sub>(4πd/λ), with distance d and wavelength λ in the same units. <a href="https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.525-5-202411-I!!PDF-E.pdf">[6]</a> For a calculated 12 GHz comparison, assume a satellite directly overhead: the path is about 35,786 km for GEO and 550 km for a hypothetical LEO satellite at that altitude. Losses are approximately 205.1 and 168.8 dB, a 36.3 dB difference. These are idealized overhead paths, not general slant ranges; lower-elevation paths are longer. Rain, atmosphere, antenna gains, and network performance are excluded.</p>
<h3>Band, Size, Gain</h3>
<p>Wavelength follows λ = c / f, with c = 299,792,458 m/s. These examples provide inputs to gain and beamwidth calculations; they are not licensed service allocations.</p>
<table>
<thead>
<tr><th>Band example</th><th>Frequency</th><th>Wavelength</th></tr>
</thead>
<tbody>
<tr><td>L-band</td><td>1.5 GHz</td><td>about 200 mm</td></tr>
<tr><td>S-band</td><td>2.5 GHz</td><td>about 120 mm</td></tr>
<tr><td>C-band</td><td>4 GHz</td><td>about 75 mm</td></tr>
<tr><td>X-band</td><td>10 GHz</td><td>about 30 mm</td></tr>
<tr><td>Ku-band</td><td>12 GHz</td><td>about 25 mm</td></tr>
<tr><td>Ku-band uplink</td><td>14 GHz</td><td>about 21 mm</td></tr>
<tr><td>Ka-band</td><td>30 GHz</td><td>about 10 mm</td></tr>
</tbody>
</table>
<p>For a circular aperture, the model is G = η(πD/λ)² in linear units, or 10 log<sub>10</sub>(G) in dBi. NASA’s reflector analysis gives the equivalent relationship G = η × 4πA/λ²; substituting the circular area A = πD²/4 gives this expression. <a href="https://ntrs.nasa.gov/api/citations/20110023748/downloads/20110023748.pdf">[7]</a> The following calculations assume aperture efficiency η = 0.6 at every listed frequency. They do not include additional downstream feeder, mismatch, radome, or pointing losses. Real efficiency and the measurement reference plane must be established for the selected antenna.</p>
<table>
<thead>
<tr><th>Dish</th><th>Frequency</th><th>Wavelength</th><th>Calculated gain, η = 0.6</th></tr>
</thead>
<tbody>
<tr><td>0.6 m</td><td>12 GHz, Ku-band</td><td>25.0 mm</td><td>about 35.3 dBi</td></tr>
<tr><td>0.9 m</td><td>12 GHz, Ku-band</td><td>25.0 mm</td><td>about 38.9 dBi</td></tr>
<tr><td>1.2 m</td><td>12 GHz, Ku-band</td><td>25.0 mm</td><td>about 41.4 dBi</td></tr>
<tr><td>2.4 m</td><td>12 GHz, Ku-band</td><td>25.0 mm</td><td>about 47.4 dBi</td></tr>
<tr><td>1.2 m</td><td>4 GHz, C-band</td><td>75.0 mm</td><td>about 31.8 dBi</td></tr>
<tr><td>1.2 m</td><td>30 GHz, Ka-band</td><td>10.0 mm</td><td>about 49.3 dBi</td></tr>
</tbody>
</table>
<p>As a sensitivity calculation—not a claimed production range—a 1.2 m dish at 12 GHz gives about 41.0 dBi at η = 0.55 and 42.0 dBi at η = 0.70. Ask which losses a supplier’s efficiency or gain figure already includes so that the link budget does not count them twice.</p>
<blockquote>For calculated gain, request the efficiency assumption. For measured gain, request the test frequency, reference plane, and measurement conditions.</blockquote>
<p>At the same frequency and efficiency, doubling diameter adds approximately 6.0 dB of gain. It also approximately halves beamwidth, so the mount and pointing system must support a narrower beam. Surface accuracy must be assessed against operating wavelength and the allowable efficiency loss, not diameter alone.</p>
<p>For an illustrative dish beamwidth estimate, use 70λ/D degrees, with λ and D in the same units. The coefficient already yields degrees. It gives approximately 1.5° for a 1.2 m dish at 12 GHz, 0.7° for 2.4 m at 12 GHz, and 0.6° for 1.2 m at 30 GHz. Actual half-power beamwidth depends on illumination and antenna design. Estimate site attenuation separately with ITU-R P.618-14; beamwidth is not a rain-margin calculation. <a href="https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.618-14-202308-I!!PDF-E.pdf">[4]</a></p>
<h3>Gain, Noise, Pointing</h3>
<p>G/T expresses receive gain relative to system noise temperature, usually in dB/K. EIRP combines transmitter power and antenna gain, with losses referred to a consistent point. At 12 GHz and equal efficiency, a 1.2 m dish needs approximately four times the transmit power of a 2.4 m dish to produce the same EIRP, if all other losses are equal. Moving to the larger dish reverses that trade-off; it does not require four times the power.</p>
<p>For an idealized flat aperture, projected area scales as cos θ away from broadside. The calculated area-only loss −10 log<sub>10</sub>(cos θ) is about 1.5 dB at 45° and 3.0 dB at 60°. This is a geometric illustration, not a prediction of a particular panel’s scan performance. Element patterns, coupling, mismatch, polarization, and radome effects require actual EIRP and G/T curves across scan.</p>
<p>Beyond raw gain, neighboring satellites impose sidelobe envelopes, and the US earth-station rule cited above gives one enforceable example. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">[5]</a> ITU-R S.465-6 gives the companion international reference pattern for coordination and interference assessment from 2 to 31 GHz. <a href="https://www.itu.int/rec/R-REC-S.465-6-201001-I/en">[8]</a></p>
<h3>Mistakes</h3>
<ul>
<li>A larger dish can lose its expected advantage if mount deflection or pointing error consumes the extra link margin. Check those errors before reusing the old mount.</li>
<li>Panel thickness says little; panels of equal size differ in EIRP across scan, handover behavior, modem pairing, and power draw.</li>
<li>Motorized acquisition is not proof of in-motion stabilization. A driveaway terminal that acquires GEO after parking is not automatically suitable for transmitting while the vehicle moves.</li>
<li>Tracking can be unnecessary at a stationary GEO site, but remains useful or necessary for directional non-GEO links from the same site.</li>
<li>Feed or waveguide loss before the receiver can degrade G/T; transmit-path loss reduces radiated power. Establish the RF reference planes before comparing complete terminals.</li>
<li>An unapproved terminal can fail on frequency use, EIRP density, sidelobe behavior, or certification; the approved list comes before gain comparison. Off-axis EIRP-density envelopes for FSS earth stations in the covered bands are specified in 47 CFR 25.218. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.218">[9]</a></li>
</ul>
<h3>Worked Selection Scenarios</h3>
<h4>Parked emergency vehicle or broadband on the move?</h4>
<p>Consider an emergency team that needs a link only after parking. A driveaway or flyaway GEO dish is a candidate: compare deployment clearance, roof or ground support, power, acquisition, and the approved RF chain. If the requirement changes to broadband while driving, reopen the selection around a motion-rated terminal. The driveaway label and automatic acquisition alone do not satisfy that new requirement. This is a selection scenario, not a reported customer deployment.</p>
<h4>Same dish size, different pointing budget</h4>
<p>Using the calculated 1.2 m examples above, a 0.3° pointing error is about one-fifth of the estimated 12 GHz beamwidth, but about one-half of the 30 GHz beamwidth. A mount acceptable for the first design therefore cannot be accepted for the second without checking its error budget and the measured antenna pattern. Those fractions compare angle with beamwidth; they are not calculated pointing losses in dB, and the examples are not field-test results.</p>
<h3>Specification Checklist</h3>
<p>A useful request specifies the satellite service, site location, exact receive and transmit ranges, polarization, data-rate and availability targets, whether operation is parked or in motion, mounting limits, and the required RF chain. A reflector diameter alone cannot define that configuration.</p>
<ul>
<li>Which satellite system and orbit is this terminal approved for?</li>
<li>What are warranted EIRP and G/T, over which band and scan or tracking range?</li>
<li>How does it acquire and hand over satellites, and how long does traffic pause?</li>
<li>What are pointing accuracy, stabilization range, power, cooling, weight, and mounting envelope?</li>
<li>What sidelobe, EIRP-density, and certification limits does it meet?</li>
</ul>
<blockquote>If the answer is only a broadside gain number or a panel thickness, ask for the sweep data, scan plots, and test conditions.</blockquote>
<p>Choose the simplest operator-supported antenna that meets the link budget over the full operating range. That may be a fixed GEO dish, a parked deployable terminal, a stabilized or tracking broadband terminal, a gateway reflector, or a compact low-rate antenna. Final selection depends on documented performance and service compatibility, not a single gain figure.</p>
<div data-cta="true" style="margin:28px 0;padding:20px 24px;border:1px solid #8D1616;border-radius:8px;text-align:center;">
<p style="margin:0 0 12px;font-size:16px;line-height:1.6;color:#333333;">Describe your application — orbit, frequency band, and mounting limits — to receive a configuration review for the terminal options above.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:10px 28px;border:1px solid #8D1616;border-radius:6px;color:#8D1616;font-size:15px;font-weight:600;letter-spacing:0.5px;text-decoration:none;">Request a Configuration Review</a>
</div>
<h3>References</h3>
<ol>
<li>NASA Earthdata, <em>Orbits</em>. <a href="https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/orbits">https://www.earthdata.nasa.gov/learn/earth-observation-data-basics/orbits</a></li>
<li>European Space Agency, <em>Types of orbits</em>. <a href="https://www.esa.int/Enabling_Support/Space_Transportation/Types_of_orbits">https://www.esa.int/Enabling_Support/Space_Transportation/Types_of_orbits</a></li>
<li>European Space Agency, <em>Satellite frequency bands</em>. <a href="https://www.esa.int/Applications/Connectivity_and_secure_communications/Satellite_frequency_bands">https://www.esa.int/Applications/Connectivity_and_secure_communications/Satellite_frequency_bands</a></li>
<li>Recommendation ITU-R P.618-14 (08/2023), <em>Propagation data and prediction methods required for the design of Earth-space telecommunication systems</em>. <a href="https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.618-14-202308-I!!PDF-E.pdf">https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.618-14-202308-I!!PDF-E.pdf</a></li>
<li>47 CFR 25.209, <em>Earth station antenna performance standards</em>, Federal Communications Commission, eCFR. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209</a></li>
<li>Recommendation ITU-R P.525-5 (11/2024), <em>Calculation of free-space attenuation</em>. <a href="https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.525-5-202411-I!!PDF-E.pdf">https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.525-5-202411-I!!PDF-E.pdf</a></li>
<li>NASA/TM—2011-217110, <em>The Effect of Boundary Support and Reflector Dimensions on Inflatable Parabolic Antenna Performance</em>, Equation (10). <a href="https://ntrs.nasa.gov/api/citations/20110023748/downloads/20110023748.pdf">https://ntrs.nasa.gov/api/citations/20110023748/downloads/20110023748.pdf</a></li>
<li>Recommendation ITU-R S.465-6 (01/2010), <em>Reference radiation pattern of earth station antennas in the fixed-satellite service for use in coordination and interference assessment in the frequency range from 2 to 31 GHz</em>. <a href="https://www.itu.int/rec/R-REC-S.465-6-201001-I/en">https://www.itu.int/rec/R-REC-S.465-6-201001-I/en</a></li>
<li>47 CFR 25.218, <em>Off-axis EIRP density envelopes for FSS earth stations transmitting in certain frequency bands</em>, Federal Communications Commission, eCFR. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.218">https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.218</a></li>
</ol>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/which-satellite-antenna-type-fits-your-application-2de39f98/">Which Satellite Antenna Type Fits Your Application?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>How Does a Satellite Dish Focus Radio Waves?</title>
		<link>https://www.dolphmicrowave.com/default/how-satellite-dish-focus-radio-waves-e8116ff1/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 12:42:37 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9684</guid>

					<description><![CDATA[<p>Learn how a satellite dish focuses radio waves: parabolic reflector geometry, equal-path in-phase combining, feed horn pickup, bands, dish sizes, and what breaks the focus.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/how-satellite-dish-focus-radio-waves-e8116ff1/">How Does a Satellite Dish Focus Radio Waves?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen.webp" alt="How Does a Satellite Dish Focus Radio Waves?" class="wp-image-9689" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9684-gen-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p>A satellite dish focuses radio waves by reflecting them from a parabolic surface toward a feed horn. For waves arriving along the dish’s axis from a distant satellite, the total paths from a common incoming wavefront, via different parts of the reflector, to the focus are equal. The reflected waves therefore arrive in phase and reinforce one another, allowing the feed to collect energy intercepted across the dish’s opening <a href="https://public.nrao.edu/telescopes/radio-telescopes/">[1]</a> <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<h3>Why a parabolic reflector brings waves together</h3>
<p>A dish is a three-dimensional paraboloid, or an offset section of one. Its conductive surface reflects radio waves, while its curvature determines where they go. A flat metal sheet can reflect a wave, but it does not bring parallel incoming rays to a common focus. A paraboloid does <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<p>The geometry works like a flashlight in reverse: a light source at a reflector’s focus produces a directed beam; a receiving dish gathers an incoming beam toward its feed. NASA describes the same parabolic geometry as useful for both capturing and transmitting signals <a href="https://www.nasa.gov/directorates/space-operations/space-communications-and-navigation-scan-program/scan-outreach/fun-facts">[3]</a>.</p>
<h3>How equal path lengths keep the waves in phase</h3>
<p>Because the satellite is far away compared with the dish’s diameter, its wavefront is approximately flat across the aperture. Imagine two rays leaving that same wavefront: one strikes near the middle of a centered dish, and another strikes near the rim. Their distances before reflection differ, as do their distances after reflection. The parabolic shape makes the two total distances equal <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<blockquote><p>Equal path length means the entire journey from a common incoming wavefront to the focus—not equal distances from every point on the reflector to the feed.</p></blockquote>
<p>This lets contributions from across the reflector add coherently. The focus is not an infinitely small point: diffraction gives a real antenna a finite focal region and a finite beamwidth. A pointing error reduces the response as the satellite moves away from the antenna’s beam center; it does not make reception disappear at every nonzero angle <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<h3>What the feed horn and LNB do</h3>
<p>The reflector gathers and redirects energy; it does not supply electronic amplification. The feed horn couples the focused field into the receiver. On a typical home satellite-TV installation, the feed is combined with a low-noise block downconverter, or LNB, on the support arm.</p>
<ol>
<li>The reflector concentrates the incoming field near the focus.</li>
<li>The feed couples that field into the receiver’s waveguide or probe.</li>
<li>The LNB amplifies the received signal and converts it to a lower frequency for the cable.</li>
<li>The indoor receiver processes the selected signal.</li>
</ol>
<p>The correct feed depends on more than the band name. Its radiation pattern must match the reflector geometry. Dolph’s <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">microwave feedhorn range</a>, for example, includes configurations for prime-focus, offset, and Cassegrain systems. Where a separate waveguide interface is needed, a <a href="https://www.dolphmicrowave.com/product/waveguide-to-coaxial-adapters/">waveguide-to-coaxial adapter</a> provides the transition between those transmission-line types; it is not what focuses the dish.</p>
<p>Feed positioning concerns the horn’s electrical phase center, not simply the visible end of its housing. An NRAO feed-horn study reports a phase center located inside the horn and changing with frequency. That is why sighting along an LNB arm cannot establish the exact focal position <a href="https://science.nrao.edu/facilities/vlba/publications/memos/upgrade/sensimemo37.pdf">[4]</a>.</p>
<h3>How offset and two-reflector dishes arrange the feed</h3>
<p>A centered prime-focus antenna places the feed in front of the main reflector, where the feed and its supports block part of the aperture. An offset reflector uses an off-axis section of a parent paraboloid, allowing the feed to sit clear of the main incoming beam. Two-reflector systems instead relay the field to a secondary focus <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<table>
<thead><tr><th scope="col">Layout</th><th scope="col">How the field reaches the feed</th></tr></thead>
<tbody>
<tr><td>Prime focus</td><td>The main reflector directs incoming energy toward a feed at its prime focus.</td></tr>
<tr><td>Offset</td><td>An off-axis reflector section directs energy to a feed outside the main aperture’s projected area.</td></tr>
<tr><td>Cassegrain</td><td>A convex secondary intercepts rays before the prime focus and redirects them toward a feed near the main reflector’s vertex.</td></tr>
<tr><td>Gregorian</td><td>A concave secondary beyond the prime focus redirects energy toward the secondary focus.</td></tr>
</tbody>
</table>
<p>Some large antennas use a beam-waveguide arrangement: additional mirrors guide the signal toward equipment below the antenna <a href="https://www.nasa.gov/directorates/space-operations/space-communications-and-navigation-scan-program/scan-outreach/fun-facts">[3]</a>. These optical paths should not be confused with a <a href="https://www.dolphmicrowave.com/product/antenna-feeder-networks/">feed network</a>, which combines components such as horns, filters, and polarization devices.</p>
<h3>How wavelength, diameter, and surface accuracy affect reception</h3>
<h4>Wavelength sets the scale</h4>
<p>The wavelengths below are calculated using λ = c / f, with the exact vacuum light speed c = 299,792,458 m/s. Frequency ranges use NASA’s listed radar-band convention; they are broad labels, not a statement that every frequency in each band is allocated to satellite links <a href="https://physics.nist.gov/cuu/Constants/Table/allascii.txt">[5]</a> <a href="https://www.nasa.gov/directorates/space-operations/space-communications-and-navigation-scan-program/scan-outreach/fun-facts">[3]</a>.</p>
<table>
<thead><tr><th scope="col">Band</th><th scope="col">Frequency range</th><th scope="col">Calculated wavelength</th></tr></thead>
<tbody>
<tr><td>C</td><td>4–8 GHz</td><td>About 7.5–3.75 cm</td></tr>
<tr><td>X</td><td>8–12 GHz</td><td>About 3.75–2.50 cm</td></tr>
<tr><td>Ku</td><td>12–18 GHz</td><td>About 2.50–1.67 cm</td></tr>
<tr><td>Ka</td><td>27–40 GHz</td><td>About 11.1–7.5 mm</td></tr>
</tbody>
</table>
<p>Band boundaries vary by convention: ESA’s satellite-band overview lists Ka as 26–40 GHz. Use the actual operating frequency when selecting hardware or calculating wavelength. ESA also notes the greater rain-fade susceptibility of higher-frequency satellite links <a href="https://www.esa.int/Applications/Connectivity_and_Secure_Communications/Satellite_frequency_bands">[6]</a>.</p>
<h4>Dish diameter changes collecting area and beamwidth</h4>
<p>For a circular projected aperture, geometric area is A = πD² / 4. These calculated examples describe the opening, not the effective receiving area:</p>
<table>
<thead><tr><th scope="col">Aperture diameter</th><th scope="col">Geometric area</th></tr></thead>
<tbody>
<tr><td>0.6 m</td><td>About 0.28 m²</td></tr>
<tr><td>1.2 m</td><td>About 1.13 m²</td></tr>
<tr><td>2.4 m</td><td>About 4.52 m²</td></tr>
</tbody>
</table>
<p>Doubling the diameter quadruples geometric area. Effective receiving area is smaller because aperture efficiency accounts for illumination, spillover, blockage, and other antenna losses. At a fixed wavelength and with comparable illumination, a larger aperture also produces a narrower beam, making accurate pointing more important <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<h4>Surface errors disturb coherent focusing</h4>
<p>Dents and warping change the reflected path lengths. The same physical surface error is generally more significant at shorter wavelengths, so a dish that works acceptably at a lower frequency may not meet a higher-frequency requirement. This is a matter of surface accuracy and the affected area, not a universal dent-depth pass/fail rule <a href="https://public.nrao.edu/telescopes/radio-telescopes/">[1]</a> <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<h3>Practical checks: what you can establish and what you cannot</h3>
<p>Consider an existing offset TV dish with weak reception. Its feed arm and housing show where the feed assembly is mounted, but they do not prove that its electrical phase center is correctly positioned. Start with the specified feed and mounting dimensions for that reflector rather than treating the LNB’s plastic cap as a focal-point marker <a href="https://science.nrao.edu/facilities/vlba/publications/memos/upgrade/sensimemo37.pdf">[4]</a>.</p>
<p>A wavelength comparison can help explain a damaged reflector without pretending to test it. For illustration, λ is about 25 mm at 12 GHz and 10 mm at 30 GHz. A hypothetical 5 mm surface displacement is therefore about one-fifth and one-half of those wavelengths, respectively. These are calculated ratios, not measured gain losses. A local displacement is not the same as the dish’s overall RMS surface error, and the ratios alone cannot establish whether either installation passes its requirements <a href="https://physics.nist.gov/cuu/Constants/Table/allascii.txt">[5]</a> <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>.</p>
<p>For a mesh reflector, comparing openings with wavelength is only a preliminary check. A ruler measurement does not certify Ku-band performance: the reflector still needs suitable electrical construction and surface accuracy. Check its specified operating band rather than assuming that any mesh with millimeter-sized openings will work.</p>
<p>Separate focusing problems from other faults before replacing a dish. Incorrect pointing, an incompatible feed, or a distorted reflector can reduce antenna response; a blocked sightline or rain fade can weaken the link without moving the geometrical focus. A visual inspection can identify obvious obstructions or damage, but confirming RF performance requires signal measurements.</p>
<h3>Does the same dish focus transmitted waves?</h3>
<p>Yes. In reverse, a feed at the appropriate focus illuminates the reflector, which forms a directed outgoing beam. The same reciprocity principle connects an antenna’s transmitting and receiving patterns <a href="https://www.cv.nrao.edu/~sransom/web/Ch3.html">[2]</a>. A feed pattern that is too broad spills energy beyond the reflector; one that is too narrow under-illuminates its outer area.</p>
<p>In a dual-polarized system, an <a href="https://www.dolphmicrowave.com/product/omt-orthogonal-mode-transducer/">orthomode transducer</a> can separate or combine the orthogonal polarization paths. It manages polarization channels; the reflector remains responsible for focusing. Whether the antenna is a fixed earth station or a <a href="https://www.dolphmicrowave.com/product/1-2m-quick-deploy-flyaway-antenna/">portable flyaway terminal</a>, the essential match is between reflector geometry, feed position, feed pattern, and operating frequency.</p>
<div data-cta="true" style="max-width:640px;margin:32px auto 0;padding:24px 28px;border:1px solid #e6e6e6;border-radius:10px;text-align:left;">
<p style="margin:0 0 8px;font-size:17px;line-height:1.6;color:#1e293b;font-family:inherit;">Planning a reflector feed for a specific band and dish size?</p>
<p style="margin:0 0 18px;font-size:15px;line-height:1.6;color:#67768e;font-family:inherit;">Share your frequency plan, reflector geometry, and waveguide interface for an engineering review.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:11px 26px;border:1px solid #060097;border-radius:6px;color:#060097;font-size:15px;font-weight:600;letter-spacing:0.02em;text-decoration:none;">Contact Engineering</a>
</div>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/how-satellite-dish-focus-radio-waves-e8116ff1/">How Does a Satellite Dish Focus Radio Waves?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Can Two Satellites Reuse the Same Frequency?</title>
		<link>https://www.dolphmicrowave.com/default/two-satellites-reuse-same-frequency-d705914f/</link>
		
		<dc:creator><![CDATA[Dolph]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 09:23:34 +0000</pubDate>
				<category><![CDATA[default]]></category>
		<guid isPermaLink="false">https://www.dolphmicrowave.com/?p=9683</guid>

					<description><![CDATA[<p>Can two satellites reuse the same frequency? Learn how antennas, polarization, coverage and codes enable sharing, and what to check before changing hardware.</p>
<p>The post <a href="https://www.dolphmicrowave.com/default/two-satellites-reuse-same-frequency-d705914f/">Can Two Satellites Reuse the Same Frequency?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></description>
										<content:encoded><![CDATA[<article><figure class="wp-block-image size-large aligncenter"><img loading="lazy" decoding="async" width="1400" height="787" src="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen.webp" alt="Can Two Satellites Reuse the Same Frequency?" class="wp-image-9690" srcset="https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen.webp 1400w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen-300x169.webp 300w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen-1024x576.webp 1024w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen-768x432.webp 768w, https://www.dolphmicrowave.com/wp-content/uploads/2026/11/9683-gen-600x337.webp 600w" sizes="auto, (max-width: 1400px) 100vw, 1400px" /></figure><p>Yes. Two satellites can transmit on the same frequency at the same time if each receiver can recover its intended signal despite the other transmission. Frequency reuse works through directional antennas, geographic separation, orthogonal polarization, or compatible signal codes. Operators must also meet the applicable coordination and authorization requirements. Using the same frequency does not automatically cause harmful interference, but sharing a frequency band alone does not prove that two links are compatible.</p>
<h3>What Does Sharing the Same Frequency Actually Mean?</h3>
<p>Two satellites using the same band may occupy different channels and never overlap. True co-frequency reuse means their occupied frequencies overlap. Whether they interfere depends on how much unwanted energy reaches each receiver and how that receiver processes the signals.</p>
<p>Simultaneous reuse and time sharing are different arrangements. Directional antennas, separate coverage areas, polarization, and code separation can support simultaneous use. Scheduling transmissions at different times avoids simultaneous use of the channel.</p>
<h3>Which Satellite Links Can Reuse a Frequency?</h3>
<table>
<thead><tr><th scope="col">Link arrangement</th><th scope="col">Can simultaneous reuse work?</th><th scope="col">What needs checking?</th></tr></thead>
<tbody>
<tr><td>Geostationary satellites viewed in different directions</td><td>Yes, where antenna discrimination is sufficient</td><td>Apparent angular separation, antenna patterns, and interfering power at each receiver</td></tr>
<tr><td>Links serving geographically separated areas</td><td>Yes, where coverage isolation is sufficient</td><td>Actual beam patterns and unwanted signal levels, not just coverage-map boundaries</td></tr>
<tr><td>Overlapping coverage with orthogonal polarizations</td><td>Potentially</td><td>End-to-end cross-polar isolation, including propagation and alignment effects</td></tr>
<tr><td>GPS satellites transmitting a shared signal type</td><td>Yes, by system design</td><td>Satellite-specific spreading codes and a compatible receiver</td></tr>
<tr><td>Nearby satellites with overlapping coverage, the same polarization, and overlapping channels</td><td>Requires a detailed interference assessment</td><td>Whether directional discrimination, power limits, or another separation mechanism is adequate</td></tr>
</tbody>
</table>
<p>These are engineering possibilities, not permissions to transmit. A working configuration must protect the affected receivers as well as deliver its own service.</p>
<h3>Who Coordinates and Authorizes Frequency Reuse?</h3>
<p>The ITU provides the international framework for coordinating satellite spectrum and orbital resources through national administrations. An international filing is not a substitute for the authorizations required by the relevant national regulator. <a href="https://www.itu.int/en/ITU-R/space/Pages/default.aspx">[1]</a></p>
<p>For example, U.S. rules require space-station and earth-station transmissions to operate under an appropriate FCC authorization. A receive-only user and an earth-station operator transmitting an uplink do not necessarily have the same licensing obligations. Check the requirements for the station and activity involved rather than assuming every receiver needs an individual transmit license. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-B/section-25.102">[2]</a></p>
<h3>How Far Apart Must Two Satellites Be?</h3>
<p>There is no single minimum separation that guarantees reuse for every link. For geostationary satellites, the relevant geometry includes their apparent angular separation from the earth station. The antenna&#8217;s response toward the unwanted satellite, together with the interfering signal level, determines how much isolation that geometry provides.</p>
<p>For comparable antenna designs, a larger reflector at the same frequency generally gives a narrower main beam. At a fixed reflector size, a higher frequency also generally narrows the beam. Neither relationship replaces the actual sidelobe pattern or a pointing check. Orbital separation can help both reception and transmission: the receiving dish rejects off-axis signals, while the transmitting dish limits energy sent toward other satellites.</p>
<p>As one specific U.S. example, 47 CFR 25.209(a)(2) gives a conventional Ku-band co-polar transmit-gain envelope of 29 − 25 log10(θ) dBi for 1.5° ≤ θ ≤ 7° in the plane tangent to the geostationary orbit arc. Here θ is the off-axis angle in degrees. The provision concerns FSS earth stations transmitting to GSO satellites and is subject to the rule&#8217;s exceptions and allowances. It is an antenna-performance requirement, not a universal satellite-spacing rule. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">[3]</a></p>
<h3>Can Opposite Polarizations Separate Two Links?</h3>
<p>Yes, orthogonal polarization can provide substantial isolation between co-frequency links. Examples include horizontal and vertical linear polarization, or the two opposite senses of circular polarization. Whether that isolation is sufficient must be established for the complete link, rather than inferred from the polarization labels.</p>
<p><a href="https://www.dolphmicrowave.com/product/omt-orthogonal-mode-transducer/">Orthomode transducers</a> separate orthogonal polarization paths in a feed assembly; polarizers support the required polarization conversion. These functions do not make cross-polar leakage disappear. Antenna alignment, feed performance, and propagation conditions all affect the isolation available at the receiver.</p>
<p>Rain-related depolarization can reduce cross-polar discrimination. ITU-R P.618 provides propagation prediction methods for Earth-space system design, including relevant cross-polarization effects. Use the applicable method and site conditions rather than treating a nominal hardware specification as an all-weather guarantee. <a href="https://www.itu.int/rec/R-REC-P.618/en">[4]</a></p>
<h3>How Do Spot Beams Reuse Frequencies?</h3>
<p>A multi-beam satellite can reuse frequencies in spatially separated beams. This is reuse within one system, whereas two different satellites may require coordination between separate networks. In either case, the useful question is how much energy from a co-frequency beam reaches an affected receiver.</p>
<p>Beam edges are not hard walls. Signals extend beyond the main coverage area, so non-overlapping coverage outlines alone do not establish compatibility. A frequency-and-polarization reuse pattern assigns resources to beams while accounting for their interference into other beams.</p>
<h3>How Can GPS Satellites Use the Same Carrier?</h3>
<p>GPS provides a concrete example of co-frequency signals separated by design. Its L1 C/A signals use satellite-specific pseudorandom-noise sequences. A receiver uses the appropriate code to distinguish a wanted satellite&#8217;s signal from other signals on the shared carrier. IS-GPS-200N specifies the L1/L2 interfaces and C/A-code assignments. <a href="https://www.gps.gov/sites/default/files/2025-07/IS-GPS-200N.pdf">[5]</a></p>
<p>Code separation is a property of the signal system and receiver. Two unrelated satellite communications links do not become compatible simply because their data streams differ. The GPS example also should not be generalized to every navigation signal or constellation.</p>
<h3>Does Sharing a Downlink Also Permit Sharing the Uplink?</h3>
<p>No. Uplink and downlink compatibility require separate assessments. On the downlink, a ground receiver may receive unwanted energy from another satellite. On the uplink, a transmission intended for one satellite may also reach another satellite&#8217;s receiver. Power, antenna patterns, frequencies, and authorization conditions differ between the paths.</p>
<h4>What Do C-Band and Ku-Band Definitions Tell You?</h4>
<p>The following are U.S. FCC conventional fixed-satellite band definitions, not a list of frequencies available to every operator or location. They illustrate paired transmission directions, not two satellites reusing one channel. <a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-B/section-25.103">[6]</a></p>
<table>
<thead><tr><th scope="col">Defined band</th><th scope="col">Earth-to-space</th><th scope="col">Space-to-Earth</th><th scope="col">Span in each direction</th><th scope="col">Nearest-edge separation</th></tr></thead>
<tbody>
<tr><td>Conventional C-band</td><td>5.925–6.425 GHz</td><td>3.7–4.2 GHz</td><td>500 MHz</td><td>1,725 MHz</td></tr>
<tr><td>Conventional Ku-band</td><td>14.0–14.5 GHz</td><td>11.7–12.2 GHz</td><td>500 MHz</td><td>1,800 MHz</td></tr>
</tbody>
</table>
<p>The derived values are simple edge subtractions: 6,425 − 5,925 = 500 MHz and 5,925 − 4,200 = 1,725 MHz for the C-band example; 14,500 − 14,000 = 500 MHz and 14,000 − 12,200 = 1,800 MHz for Ku-band. The downlink spans are also 500 MHz. None of these figures represents an assigned customer channel or interference-free guard spectrum.</p>
<h4>Why Is a Frequency Comparison Not a Reuse Test?</h4>
<p>ITU-R P.525 gives the free-space attenuation relationship. At equal distance, comparing rounded frequencies produces 20 log10(6/4) = 3.52 dB and 20 log10(14/12) = 1.34 dB differences in the free-space loss term. These are calculations, not measurements. They exclude antenna gains and other link-budget terms, and they say nothing by themselves about co-channel isolation. <a href="https://www.itu.int/rec/R-REC-P.525/en">[7]</a></p>
<h3>What Would a Practical Shared-Frequency Review Check?</h3>
<p>Consider a hypothetical receive-only installation pointed at one geostationary satellite, with a second satellite using an overlapping downlink channel. Before accepting a replacement dish or feed, compare the proposed hardware against the assumptions in the interference assessment.</p>
<ul>
<li><strong>Identify the overlap.</strong> Record the wanted and unwanted satellites, occupied channels, polarization, and proposed station location. A common band name is not enough.</li>
<li><strong>Check the unwanted direction.</strong> Obtain antenna gain patterns at the operating frequency and the apparent satellite separation. Do not approve a smaller dish solely because its on-axis gain can support the wanted link.</li>
<li><strong>Check the polarization path.</strong> Match feed ports, polarization settings, and specified cross-polar performance to the link plan, including the relevant propagation allowance.</li>
<li><strong>Assess the receiver.</strong> Compare the predicted wanted and aggregate unwanted signals with the receiver&#8217;s required performance, including operating and weather conditions.</li>
<li><strong>Confirm the operating conditions.</strong> For a transmitting station, check the permitted satellite, power density, bandwidth, antenna performance, and authorization before transmitting.</li>
</ul>
<p>If the replacement hardware lacks the off-axis or cross-polar data used in the assessment, compatibility remains unproven. That is a reason to request evidence or recalculate, not proof that the link must fail. This scenario is a review workflow, not a reported customer installation or field test.</p>
<h3>Which Ground Components Matter Most?</h3>
<p>The <a href="https://www.dolphmicrowave.com/product-category/satcom-antenna/">antenna and reflector</a> provide directional discrimination. The <a href="https://www.dolphmicrowave.com/product/microwave-feedhorn/">feedhorn</a>, polarization components, and their alignment affect the complete antenna pattern and polarization performance.</p>
<p>Filters and <a href="https://www.dolphmicrowave.com/product/waveguide-diplexer/">waveguide diplexers</a> separate frequency paths, such as paired transmit and receive bands. They generally cannot remove another signal occupying the same passband just because it comes from a different satellite. A waveguide run also introduces loss; it is not a substitute for spatial or polarization isolation.</p>
<p>When comparing components from <a href="https://www.dolphmicrowave.com/">Dolph Microwave</a>, match the operating band, flange interface, power handling, polarization function, and documented performance to the coordinated system design.</p>
<div data-cta="true" style="margin:28px 0;padding:20px 22px;border:1px solid #060097;border-radius:8px;">
<p style="margin:0 0 6px;font-size:17px;line-height:1.5;color:#1e293b;">Planning a shared-frequency link?</p>
<p style="margin:0 0 14px;font-size:14px;line-height:1.6;color:#67768e;">Send your band, polarization plan, and dish size for a feed-hardware review.</p>
<a href="https://www.dolphmicrowave.com/contact/" style="display:inline-block;padding:10px 22px;border:1px solid #060097;border-radius:6px;color:#060097;font-size:14px;text-decoration:none;">Request a Technical Review</a>
</div>
<h3>So, Can Two Satellites Reuse the Same Frequency?</h3>
<p>Yes. The deciding issue is whether the system provides enough isolation or signal separation for each receiver to operate as required. Check both transmission directions, the actual antenna and receiver performance, and the applicable authorizations. Neither a shared band label nor a different polarization label establishes compatibility on its own.</p>
<h3>References</h3>
<ol>
<li><a href="https://www.itu.int/en/ITU-R/space/Pages/default.aspx">ITU Radiocommunication Bureau, Space Services</a>. International satellite spectrum and orbital-resource framework. Accessed November 6, 2026.</li>
<li><a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-B/section-25.102">47 CFR 25.102, Station authorization required</a>. U.S. authorization requirement for space-station and earth-station transmissions. Accessed November 6, 2026.</li>
<li><a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-C/section-25.209">47 CFR 25.209, Earth station antenna performance standards</a>. Paragraph (a)(2), conventional Ku-band co-polar transmit-gain envelope; apply the full rule and its exceptions. Accessed November 6, 2026.</li>
<li><a href="https://www.itu.int/rec/R-REC-P.618/en">ITU-R P.618-14, Propagation data and prediction methods required for the design of Earth-space telecommunication systems</a>. Propagation and cross-polarization prediction methods. Accessed November 6, 2026.</li>
<li><a href="https://www.gps.gov/sites/default/files/2025-07/IS-GPS-200N.pdf">IS-GPS-200N, NAVSTAR GPS Space Segment/Navigation User Segment Interfaces</a>, August 22, 2022. Sections 3.2.1.3 and 3.3.1.1, C/A-code assignments and carrier frequencies. Accessed November 6, 2026.</li>
<li><a href="https://www.ecfr.gov/current/title-47/chapter-I/subchapter-B/part-25/subpart-B/section-25.103">47 CFR 25.103, Definitions</a>. U.S. conventional C-band and Ku-band definitions; table spans and separations calculated from the defined edges. Accessed November 6, 2026.</li>
<li><a href="https://www.itu.int/rec/R-REC-P.525/en">ITU-R P.525-5, Calculation of free-space attenuation</a>. Equal-distance, rounded-frequency calculation method; not a complete link budget. Accessed November 6, 2026.</li>
</ol>
</article><p>The post <a href="https://www.dolphmicrowave.com/default/two-satellites-reuse-same-frequency-d705914f/">Can Two Satellites Reuse the Same Frequency?</a> appeared first on <a href="https://www.dolphmicrowave.com">DOLPH MICROWAVE</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
