Name: 1.2/1.5/1.8/2.4 Meter Vehicle Mounted Driveaway SNG Antenna
Brand: DOLPH MICROWAVE
Price: 1 USD

Driveaway SNG Antenna Range

Vehicle-Mounted Satellite Antenna Systems for Field Deployment

The DH range is built around carbon-fiber reflector construction, three motorized pointing axes and controller-assisted acquisition. The four aperture sizes share the same deployment concept but differ in RF performance, movement range, packaging, weight and environmental ratings.

Aperture Range1.2–2.4 m

Four vehicle-mounted reflector sizes allow the antenna package to be matched to link budget, roof space, payload and stowed-envelope constraints.

Published Ku Gain42.1–48.81 dBi

Published mid-band gain ranges from 42.1 dBi receive on the 1.2 m model to 48.81 dBi transmit on the 2.4 m model.

Pointing AxesAZ / EL / POL

Azimuth, elevation and polarization movement are motorized. Published travel and speed ranges differ by reflector size.

AcquisitionBeacon / DVB

The 1.2–1.8 m sheets list Beacon pointing/DVB acquisition. The 2.4 m sheet lists built-in DVB-S, DVB-S2 and CW beacon functions.

Configuration Accuracy

Confirm the Final Band and Feed Before Ordering

The published model sheets use different band labels. The RF tables for all four models show Ku-band linear values, while the feature lists and option headings identify additional feeds. The exact feed, polarization, interfaces and Rx/Tx frequencies should therefore be fixed in the quotation and approved drawing.

Published Band References

1.2 m: “Ka-Band Option” heading; Ku-band RF table; Ku and Ka feed systems listed.
1.5 m: “C-Band Option” heading; Ku-band RF table; Ku and Ka feed systems listed.
1.8 m: “C-Band Option” heading; Ku-band RF table; Ku and Ka feed systems listed.
2.4 m: L, C, X, Low Ku and Ka option ranges listed; Ku-band RF table published.

Engineering Confirmation

State the required receive and transmit frequency ranges, polarization, satellite service, feed interface, BUC/LNB arrangement and controller functions. Where a published source contains a formatting ambiguity—such as the 1.5 m transmit insertion-loss entry shown as “05”—the intended value should be confirmed in writing rather than assumed.

System Operation

From Vehicle Integration to Satellite Acquisition

A driveaway terminal is not selected by reflector diameter alone. Roof structure, RF chain, controller logic, power, cabling and operating environment must work as one system.

STEP 01

Check the Vehicle Envelope

Confirm mounting base, roof reinforcement, payload, cable routes, stowed dimensions and operating clearance.

STEP 02

Deploy the Reflector

The controller drives azimuth, elevation and polarization from the stowed position into the operating range.

STEP 03

Initialize Direction Data

Integral sensors support pointing. The 2.4 m sheet additionally lists GPS and an electronic compass.

STEP 04

Acquire the Satellite

Published modes include Beacon/DVB on the 1.2–1.8 m models and DVB-S, DVB-S2 and CW beacon functions on the 2.4 m model.

STEP 05

Verify the RF Link

Confirm signal peak, polarization, RF interfaces, BUC/LNB operation and the project-specific acceptance criteria.

Model Selection

Compare the Four Published Configurations

Use this matrix for first-pass selection. The full tables below retain every published RF, mechanical and environmental entry.

Model	Optics	Ku Rx / Tx	Gain Rx / Tx	G/T	Tx Power	Weight without BUC	Case Size	Tracking Accuracy
1.2 m	Single Offset	10.95–12.75 / 13.75–14.5 GHz	42.1 / 43.3 dBi	21.1 dB/K	1000 W	75 kg	1900 × 1400 × 600 mm	0.045°
1.5 m	Single Offset	10.95–12.75 / 13.75–14.5 GHz	43.5 / 44.8 dBi	21.5 dB/K	500 W	120 kg	1860 × 1520 × 450 mm	0.045°
1.8 m	Single Offset	10.95–12.75 / 13.75–14.5 GHz	45.1 / 46.5 dBi	20.2 dB/K	500 W	140 kg	2400 × 1800 × 450 mm	0.045°
2.4 m	Gregory Dual Offset	10.7–12.75 / 13.75–14.5 GHz	47.72 / 48.81 dBi	26.5 dB/K	400 W	380 kg	3620 × 2720 × 800 mm	Superior than 1/5 half beam-width

The published 1.8 m G/T value is lower than the 1.2 and 1.5 m entries despite the larger aperture. It is reproduced as published and should be confirmed when the link budget depends on this figure.

Applications

Where a Driveaway Antenna Fits

These systems are intended for temporary or mobile satellite links where the antenna is transported on a vehicle, deployed at the operating location and pointed toward the selected satellite.

Satellite News Gathering

Vehicle-based contribution links for live news, outside broadcasting and temporary event coverage.

Emergency Communications

Temporary voice, video or data links when terrestrial infrastructure is unavailable or disrupted.

Remote Industrial Sites

Project communications for energy, mining, exploration and other operations outside dependable terrestrial coverage.

Government Field Operations

Deployable communications where vehicle integration, controlled setup and model-specific environmental ratings are required.

Complete Published Data

Model-Specific Specifications

The descriptions, feature lists and table values below are retained from the four source data sheets. Tables scroll horizontally on smaller screens.

Ka-Band Option

1.2 Meter Vehicle-Mount / Drive Away SNG Antenna System

Published Description

Type: DH 1.2 Meter VM Ku-band Antenna

1.2 Meter Vehicle-Mount / Drive Away SNG Antenna System is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and Controller to ensure excellent pointing accuracy.

Published Key Features

1-Piece Carbon fiber folding Reflector.
Pre-Assembled Tripod Base Mount w/Pull Pins.
Ku and Ka Band Feed Systems Available.
Sturdy Boom Accommodates Outdoor Units.
Adjustable Feet for Uneven Surfaces.
Optional Lightweight Cases for Easy Transportation.

RF & Antenna Specifications

Ku-band Linear	Receive	Transmit
Frequency, GHz	10.95-12.75	13.75-14.5
Mid-Band Gain, dBi	42.1	43.3
VSWR	1.3:1	1.3:1
3dBBeam Width, deg	1.32	1.23
Noise Temperature 20 Deg Elevation, K	54	—
Noise Temperature 30 Deg Elevation, K	44	—
Typical G/T @ 10 Deg, dB/K	21.1	—
Tx Power Capability, W	—	1000
Port to Port Isolation Tx> Rx Rejection, dB	85	85
Cross-pol on Axis, dB	35	35
Insertion Loss, dB	0.4	0.25
Radiation Pattern Compliance	FCC 25.209, ITU-RS.580-6	FCC 25.209, ITU-RS.580-6
First sidelobe, dB	≤ -14	≤ -14
Sidelobe Envelope	29 – 25 log (1°≤θ＜20°)	29 – 25 log (1°≤θ＜20°)
Feed Interface	WR-75 CPR	WR-75 CPR

Mechanical Specifications

Parameter	Specification
Antenna Optics	Single Offset
Refector Aperture	1.2 Meters (3.9Feet)
Refector Material	Carbon Fiber Reinforced Polymer
Reflector Panels	1-piece
Surface Accuracy (RMS)	0.35 mm
Elevation Travel	0 to 90° Continuous
Azimuth Travel	±180° Continuous
Pol. Travel	±95° Continuous, Self Locking
Axes Velocities – Elevation	0.5°/S-3°/S
Axes Velocities – Azimuth	0.5°/S-3°/S
Axes Velocities – Pol.	0.7°/S
Power Supply	AC110～230V 50/60Hz
Auto-acquisition mode	Beacon pointing/DVB
Tracking Accuracy	0.045°
Shiping Case	1 Case, airline checkable (IATA-compliant)
Case Size	19001400600mm
Total Weight	75Kg (without BUC)

Environmental Performance

Parameter	Specification
Operational Wind	47km/h (29mph) with ballast
Temperature	-40° C to +50° C
Tightness class	IP67(Dust and Water Resistant)
Humidity	0-98%

C-Band Option

1.5 Meter Vehicle-Mount / Drive Away SNG Antenna System

Published Description

Type: DH 1.5 Meter VM Ku-band Antenna

1.5 Meter Vehicle-Mount / Drive Away SNG Antenna System is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and Controller to ensure excellent pointing accuracy.

Published Key Features

1-Piece Carbon fiber folding Reflector.
Pre-Assembled Tripod Base Mount w/Pull Pins.
Ku and Ka Band Feed Systems Available.
Sturdy Boom Accommodates Outdoor Units.
Adjustable Feet for Uneven Surfaces.
Optional Lightweight Cases for Easy Transportation.

RF & Antenna Specifications

Ku-band Linear	Receive	Transmit
Frequency, GHz	10.95-12.75	13.75-14.5
Mid-Band Gain, dBi	43.5	44.8
VSWR	1.3:1	1.3:1
3dBBeam Width, deg	1.29	1.18
Noise Temperature 20 Deg Elevation, K	58	—
Noise Temperature 30 Deg Elevation, K	47	—
Typical G/T @ 10 Deg, dB/K	21.5	—
Tx Power Capability, W	—	500
Port to Port Isolation Tx> Rx Rejection, dB	85	85
Cross-pol on Axis, dB	35	35
Insertion Loss, dB	0.4	05
Radiation Pattern Compliance	FCC 25.209, ITU-RS.580-6	FCC 25.209, ITU-RS.580-6
First sidelobe, dB	≤ -14	≤ -14
Sidelobe Envelope	29 – 25 log (1°≤θ＜20°)	29 – 25 log (1°≤θ＜20°)
Feed Interface	WR-75 CPR	WR-75 CPR

Mechanical Specifications

Parameter	Specification
Antenna Optics	Single Offset
Refector Aperture	1.5 Meters (4.9Feet)
Refector Material	Carbon Fiber Reinforced Polymer
Reflector Panels	1-piece
Surface Accuracy (RMS)	0.35 mm
Elevation Travel	0 to 90° Continuous
Azimuth Travel	±180° Continuous
Pol. Travel	±95° Continuous, Self Locking
Axes Velocities – Elevation	0.5°/S-3°/S
Axes Velocities – Azimuth	0.5°/S-3°/S
Axes Velocities – Pol.	0.7°/S
Power Supply	AC110～230V 50/60Hz
Auto-acquisition mode	Beacon pointing/DVB
Tracking Accuracy	0.045°
Shiping Case	1 Case, airline checkable (IATA-compliant)
Case Size	18601520450mm
Total Weight	120Kg (without BUC)

Environmental Performance

Parameter	Specification
Operational Wind	47km/h (29mph) with ballast
Temperature	-40° C to +50° C
Tightness class	IP67(Dust and Water Resistant)
Humidity	0-98%

C-Band Option

1.8 Meter Vehicle-Mount / Drive Away SNG Antenna System

Published Description

Type: DH 1.8 Meter VM Ku-band Antenna

1.8 Meter Vehicle-Mount / Drive Away SNG Antenna System is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and Controller to ensure excellent pointing accuracy.

Published Key Features

1-Piece Carbon fiber folding Reflector.
Pre-Assembled Tripod Base Mount w/Pull Pins.
Ku and Ka Band Feed Systems Available.
Sturdy Boom Accommodates Outdoor Units.
Adjustable Feet for Uneven Surfaces.
Optional Lightweight Cases for Easy Transportation.

RF & Antenna Specifications

Ku-band Linear	Receive	Transmit
Frequency, GHz	10.95-12.75	13.75-14.5
Mid-Band Gain, dBi	45.1	46.5
VSWR	1.3:1	1.3:1
3dBBeam Width, deg	1.18	0.98
Noise Temperature 20 Deg Elevation, K	28	—
Noise Temperature 30 Deg Elevation, K	23	—
Typical G/T @ 10 Deg, dB/K	20.2	—
Tx Power Capability, W	—	500
Port to Port Isolation Tx> Rx Rejection, dB	85	85
Cross-pol on Axis, dB	35	35
Insertion Loss, dB	0.4	0.5
Radiation Pattern Compliance	FCC 25.209, ITU-RS.580-6	FCC 25.209, ITU-RS.580-6
First sidelobe, dB	≤ -14	≤ -14
Sidelobe Envelope	29 – 25 log (1°≤θ＜20°)	29 – 25 log (1°≤θ＜20°)
Feed Interface	WR-75 CPR	WR-75 CPR

Mechanical Specifications

Parameter	Specification
Antenna Optics	Single Offset
Refector Aperture	1.8 Meters (5.9Feet)
Refector Material	Carbon Fiber Reinforced Polymer
Reflector Panels	1-piece
Surface Accuracy (RMS)	0.35 mm
Elevation Travel	0 to 90° Continuous
Azimuth Travel	Fine tuning ±220° Continuous
Pol. Travel	±95° Continuous, Self Locking
Axes Velocities – Elevation	0.01°/S-3°/S
Axes Velocities – Azimuth	0.01°/S-3°/S
Axes Velocities – Pol.	1°/S
Power Supply	AC110～230V 50/60Hz
Auto-acquisition mode	Beacon pointing/DVB
Tracking Accuracy	0.045°
Shiping Case	1 Case, airline checkable (IATA-compliant)
Case Size	24001800450mm
Total Weight	140Kg (without BUC)

Environmental Performance

Parameter	Specification
Operational Wind	47km/h (29mph) with ballast
Temperature	-40° C to +50° C
Tightness class	IP67(Dust and Water Resistant)
Humidity	0-98%

L, C, X (Military/WGS), Ka-Band Option

2.4 Meter Vehicle-Mount / Drive Away SNG Antenna System

Published Description

Type: DH 2.4 Meter VM Ku-band Antenna

2.4 Meter Vehicle-Mount / Drive Away SNG Antenna System is a sleek, simple to operate auto-deploy VSAT terminal which can be mounted on the roof of a vehicle. It is suitable for the most demanding applications. Its reflector optics feature a long focal length for excellent cross-pol performance. All three motorized axes have very low backlash and work together seamlessly with sophisticated integral sensors and Controller to ensure excellent pointing accuracy.

Published Key Features

1-Piece 2.4m carbon fiber folding reflector.
Carbon fiber reflector with light weight and strength
Build-in DVB-S, DVB-S2, and CW beacon module,
High accuracy GPS and strong anti-interference of electronic compass.
Protection functions as automatic warning, mechanical and software limit.
Sturdy boom accommodates outdoor units.
L, C, X, Low Ku and Ka Band feed systems available.

RF & Antenna Specifications

Ku-band Linear	Receive	Transmit
Frequency, GHz	10.7-12.75	13.75-14.5
Mid-Band Gain, dBi	47.72	48.81
VSWR	1.3:1	1.3:1
3dBBeam Width, deg	0.87	0.67
Noise Temperature 20 Deg Elevation, K	61	—
Noise Temperature 30 Deg Elevation, K	47	—
Typical G/T @ 10 Deg, dB/K	26.5	—
Tx Power Capability, W	—	400
Port to Port Isolation Tx> Rx Rejection, dB	85	85
Cross-pol on Axis, dB	35	35
Insertion Loss, dB	0.25	0.3
Radiation Pattern Compliance	FCC 25.209, ITU-RS.580-6	FCC 25.209, ITU-RS.580-6
First sidelobe, dB	≤ -14	≤ -14
Sidelobe Envelope	29 – 25 log (1°≤θ＜20°)	29 – 25 log (1°≤θ＜20°)
Feed Interface	WR-75 CPR	WR-75 CPR

Mechanical Specifications

Parameter	Specification
Antenna Optics	Gregory Dual Offset
Refector Aperture	2.4 Meters (7.8Feet)
Refector Material	Carbon Fiber
Surface Accuracy (RMS)	0.35 mm
Elevation Travel	5° to 90° Continuous
Azimuth Travel	±170° Continuous
Pol. Travel	±95° Continuous, Self Locking
AZ/EL/POL Axes Velocities	0.1°/S-5°/S
Power Supply	AC110～230V 50/60Hz
Controller Parameter	2U standard cabinet
Power Consumption	≤2KW
Tracking Accuracy	Superior than 1/5 half beam-width
Shiping Case	1 Case, Seaworthy packing ISPM
Case Size	36202720800mm
Total Weight	380Kg (without BUC)

Environmental Performance

Parameter	Specification
Operational Wind	47km/h (29mph)
Survival Wind Speed	198km/h (123mph) in stow
Temperature	-40° C to +55° C
Tightness class	IP65(Dust and Water Resistant)
Humidity	0-98%

Option Frequency Range

Band	Frequency Range
L-Band	1.4-1.7GHz
C-Band	3.4-4.2/5.85-6.725GHz
X-Band	7.25-7.75/7.9-8.4GHz
Low Ku-Band	10.75-11.45/12.75-13.25GHz
Ka-Band	19.6-21.2/29.4-31.0GHz

Packing List

Item	Quantity
2.4m Carbon Fiber Antenna	1 pcs
Connecting Cable 8 meter – Power supply, Control, BUC supply, RF Cable	1 set
Antenna Controller	1 pcs
Manual Handle	1 pcs
Power Supply and Monitor Interface Cable	1 set

Install Requirements

The 2.4 m data sheet includes a mounting-base layout and stowed/operating envelope. The values below reproduce the clearly marked dimensions. Use the complete drawing for fabrication, roof reinforcement, clearance and vehicle-integration checks.

Drawing Reference	Dimension
Mounting base overall size	2800mm × 1700mm
Base width reference dimensions shown	1520mm / 1140mm / 760mm / 580mm
Longitudinal reference dimensions shown	90 / 205 / 355 / 330 / 270 / 330 / 580 / 430 / 30mm
Additional reference dimensions shown	192 / 266 / 455 / 524 / 618 / 390 / 740 / 960mm
Stowed outline shown	3320mm × 2420mm
Operating unit diameter shown	Ø3200mm

Project Configuration

Information Required for Antenna and Vehicle Integration

A complete inquiry should define both the satellite link and the mechanical installation. This prevents the reflector size, feed, controller or outdoor-unit arrangement from being selected in isolation.

Project Input	Required Detail
Satellite and service area	Satellite name or orbital position, target beam, operating region and service provider requirements.
Exact receive and transmit frequencies	Use exact frequency ranges rather than only C, X, Ku or Ka band labels.
Polarization and RF interfaces	Linear or circular polarization, feed arrangement, waveguide or coaxial interfaces and flange type.
Link-budget targets	Required EIRP, G/T, availability objective, modem waveform and permitted antenna size.
BUC, LNB and outdoor units	Model, quantity, weight, power, mounting position, interfaces and cable routing. Published system weights exclude the BUC.
Vehicle structure	Roof dimensions, payload, reinforcement, mounting points, stowed height, aerodynamic limits and operating clearance.
Electrical supply	AC110–230 V, 50/60 Hz is published. The 2.4 m controller is listed as a 2U cabinet with power consumption ≤2 kW.
Acquisition and control	Beacon, DVB, DVB-S/DVB-S2, CW beacon, manual control, auto-stow and project-specific interface requirements.
Environment	Operating wind, survival wind where stated, temperature, ingress class, humidity and site exposure.
Acceptance documents	Approved configuration, drawings, interface list, packing list and the agreed RF/mechanical test requirements.

Engineering and Production

Microwave Manufacturing and Measurement Support

Dolph Microwave states that it was founded in 2001 and designs and manufactures microwave components and antenna feed systems. Its published facilities and capabilities support integration of the antenna with the required passive RF hardware.

Published Manufacturing Capabilities

CNC machining, turning, waveguide forming and bending.
Soldering and brazing of copper, copper alloys and aluminum.
Electrolytic/electroless plating, anodising and passivation.
Coordinate measurement and other dimensional inspection equipment shown on the manufacturing page.

View manufacturing capabilities →

Published Measurement Capabilities

RF vector and scalar measurement systems stated up to 100 GHz.
Antenna anechoic chambers and high-power transmitters.
Environmental testing, including temperature/altitude and salt fog/humidity.
Dolph states that its Quality Manual and Quality Procedure use ISO 9001:2015.

View support and measurement capabilities →

01Portable alternative1.2M Quick-Deploy Flyaway AntennaA transportable reflector system for field deployment without permanent vehicle-roof integration. 02Larger flyaway range1.8/2.4M Quick Deploy AntennaPortable 1.8 and 2.4 meter quick-deploy antenna options for temporary satellite links. 03Compact auto acquisition0.9/1.2 Meter Quick Deploy Auto Acquisition AntennaSmaller quick-deploy configurations with automatic acquisition functions. 04Transportable platform3.7 Meter Transportable Trailer Mounted AntennaA trailer-mounted format for applications requiring a larger reflector and transportable base. 05Feed componentMicrowave FeedhornReview feedhorn options for reflector geometry, operating band, polarization and waveguide interface. 06Polarization componentOMT (Orthogonal Mode Transducer)OMT options for separating or combining orthogonal polarization modes in antenna feed systems. 07Integrated feed chainAntenna Feeder NetworksSingle-, dual- and triple-band feed-network integration using horns, OMTs, polarizers, filters and diplexers. 08Interface componentWaveguide to Coaxial AdaptersWaveguide-to-coax transitions for matching the RF chain to BUC, LNB, test or interconnect requirements.

Technical Resources

Frequency and Interface References

Use these engineering references when defining the feed, waveguide size and interface details around the antenna system.

01Waveguide Frequency Bands ChartCompare WR sizes, operating bands, cutoff frequencies and common applications. 02Ku-Band Satellite Antenna SelectionReview Ku-band weather, throughput and dish-size considerations before fixing the link configuration. 03Waveguide Flange Size GuideCheck EIA/IEC flange systems, bolt patterns and gasket fit before finalizing mating interfaces.

Downloads

Original Model Data Sheets

Download the source document for the selected aperture. The 2.4 meter PDF also includes the packing list and installation drawing.

1.2 Meter Data SheetKu-band RF table · Ka option heading 1.5 Meter Data SheetKu-band RF table · C option heading 1.8 Meter Data SheetKu-band RF table · C option heading 2.4 Meter Data SheetBand options · packing · install drawing

Technical FAQ

Common Configuration Questions

01Are all frequency bands available on every reflector size?

No. The published RF tables show Ku-band values for all four sizes, but additional feed references differ by model. Confirm the final band, exact frequencies and feed interfaces in the quotation and approved drawing.

02Is a driveaway antenna the same as a flyaway antenna?

No. A driveaway antenna is integrated with a vehicle and deploys from the vehicle-mounted base. A flyaway antenna is transported in cases and assembled or deployed on a ground support at the operating location.

03Does auto acquisition mean continuous satellite tracking?

Not necessarily. These data sheets describe auto acquisition and pointing functions for a deployed terminal. Continuous tracking of moving LEO or MEO satellites is a different requirement and should not be assumed from the driveaway specifications.

04Are the BUC and LNB included in the published weights?

The published total weights are stated as “without BUC.” The 2.4 m packing list also does not identify a BUC or LNB as standard packed items. Confirm the outdoor RF equipment and mounting arrangement separately.

05Which model includes a published mounting drawing?

The current 2.4 m data sheet includes a mounting-base layout and a stowed/operating-envelope drawing. Vehicle integration should use the complete drawing and a structural review rather than the summary dimensions alone.

06What should be checked before final model selection?

At minimum: exact Rx/Tx frequencies, polarization, link budget, required gain and G/T, BUC/LNB arrangement, vehicle roof dimensions and payload, power supply, acquisition method, operating environment and the required acceptance documents.

One-Year Product Warranty

Dolph Microwave warrants its products to be free from defective material and workmanship for one year from the date of delivery. Defective parts and repair work required by normal use are covered within this period. The stated warranty is exclusive and replaces other expressed or implied warranties.

Define the Required Vehicle, Band and RF Chain

Send the exact Rx/Tx frequencies, target satellite, polarization, BUC/LNB details, vehicle roof envelope, power supply and environmental conditions for configuration review.

Contact Dolph Microwave