HOME » Waveguide, RF & Microwave Components » Double-Ridged Waveguide Transitions
Double-Ridged Waveguide Transitions
Double-ridged waveguide transitions connect different WRD port sizes in broadband RF assemblies. The 11 published aluminum models cover individual bands within 3.5–18 GHz, with listed VSWR of 1.15 and lengths of 125–200 mm. Select by the exact port pair, flange designations and common operating band.
Double-Ridge Waveguide Transitions for Low-Loss System Integration
Dolph Microwave double-ridged waveguide transitions connect two different WRD interfaces in an RF path. Select a transition by both port sizes, their flange codes and the operating band of the specific model. Applications include broadband test fixtures, antenna-feed assemblies and radar subsystem integration where the connected components use different waveguide sizes. The transition does not extend either connected component beyond its own operating band.
Controlled Transition Between Double-Ridge Waveguide Interfaces
The 11 listed models cover individual bands within 3.5–18 GHz and use aluminum bodies with a Chromate/Painted finish. Every row lists VSWR of 1.15 and a specific length from 125 to 200 mm. For example, DH-250DRT350WA… connects WRD250 to WRD350 over 3.50–5.80 GHz at 200 mm length; DH-500DRT650WA… connects WRD500 to WRD650 over 6.5–18.0 GHz at 130 mm. These are different configurations, not one continuously interchangeable adapter.
Tapered RF Transition
A controlled taper supports smooth modal conversion between different double-ridge waveguide sizes while reducing discontinuity-related reflections.
Low-Reflection Performance
The listed models specify VSWR of 1.15. VSWR describes impedance matching; it is not an insertion-loss value. Request insertion loss separately if the system has a defined loss budget.
Multiple Flange Options
The model rows identify the flat FPWRD flange on each port. The ordering guide also describes a grooved option; confirm any change against both mating drawings.
Corrosion Protection
Surtec treatment and flat-black paint are used on listed configurations, with other finishes and paint colors available upon request.
Custom Mechanical Length
Transition length can be reviewed against waveguide sizes, required electrical performance and the available installation envelope.
Material Flexibility
Listed models use aluminum, while aluminum, copper and other requested material or finish combinations can be reviewed for custom applications.
Low-Loss Connections for Multi-Band RF Systems
Use the transition where the RF path must change between the two WRD sizes listed for that model. Confirm that the complete signal band lies within the transition and both connected components. The published model table does not provide CW or peak power ratings; send the operating power and pulse conditions for configuration-specific review.
Radar Systems
Connects different double-ridge waveguide sections in broadband radar transmit and receive chains.
SATCOM and Ground Stations
Supports integration of broadband waveguide subsystems in satellite communication and ground-terminal equipment.
MILCOM Systems
Provides mechanical and electrical compatibility between selected double-ridge waveguide sizes in communication assemblies.
RF Test Systems
Enables repeatable interconnection of broadband waveguide components in laboratory and production-test setups.
Scientific Instrumentation
Supports broadband measurement systems that require controlled transitions between different double-ridge interfaces.
Aerospace Telemetry
Integrates broadband RF paths where size, interface compatibility and repeatable electrical performance are important.
Match Both Waveguide Ports and the Shared Operating Band
Match the transition to the double-ridged waveguide components on both sides. Confirm the common usable band, flange geometry, length and RF acceptance limits. The flange interface guide explains the drawing and mating checks; use the specific WRD flange codes in this table for the final selection.
Confirm Port 1
Specify the first waveguide family and its exact flange designation.
Confirm Port 2
Specify the second waveguide family, flange and mating arrangement.
Define the Band
Provide the actual minimum and maximum operating frequencies.
Review Length
Check the available envelope and required transition length.
Set Requirements
State VSWR, power, material, finish and documentation needs.
Do Not Select by WRD Size Alone
- Port 1 waveguide and flange
- Port 2 waveguide and flange
- Shared usable frequency range
- Maximum allowable VSWR
- Average and peak power
- Mechanical length and mounting
- Material, finish and environment
Material, Finish and Interface Options
The model table lists aluminum and Chromate/Painted finish; the ordering guide also identifies copper and flat or grooved flange options. Put any requested material, finish, length or flange variation on the RFQ and confirm it on the approved drawing. Where RoHS/REACH documentation is required, request a declaration for the quoted configuration rather than treating the catalog entry as a test report.
Information to Provide
- Port 1 and Port 2 WRD sizes
- Flange designations
- Operating frequency range
- VSWR and power requirements
- Required length or envelope
- Material and finish
- Quantity and delivery schedule
- Drawing or STEP-file requirements
Double-Ridge Waveguide Transition Specifications
Scroll horizontally to view all columns. The original 11 model rows are retained. DWG and STEP are document labels, not verified individual download links; request the current files for the exact port pair and length.
| MODEL | FREQ. RANGE (GHz) |
VSWR | LENGTH (mm) |
PORT 1 WAVEGUIDE / FLANGE TYPE |
PORT 2 WAVEGUIDE / FLANGE TYPE |
MATERIAL | FINISH | ROHS & REACH | DATASHEET | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DH-250DRT350WA… | 3.50-5.80 | 1.15 | 200 | WRD250 | FPWRD250D30 | WRD350 | FPWRD350D24 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-475DRT500WA… | 5.0-11.0 | 1.15 | 130 | WRD475 | FPWRD475D24 | WRD500 | FPWRD500D36 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-475DRT580WA… | 5.8-11.0 | 1.15 | 130 | WRD475 | FPWRD475D24 | WRD580 | FPWRD580D28 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-475DRT650WA… | 6.5-11.0 | 1.15 | 135 | WRD475 | FPWRD475D24 | WRD650 | FPWRD650D28 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-475DRT750WA… | 7.50-11.0 | 1.15 | 135 | WRD475 | FPWRD475D24 | WRD750 | FPWRD750D24 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-500DRT580WA… | 5.8-16.0 | 1.15 | 135 | WRD500 | FPWRD500D36 | WRD580 | FPWRD580D28 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-500DRT650WA… | 6.5-18.0 | 1.15 | 130 | WRD500 | FPWRD500D36 | WRD650 | FPWRD650D28 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-500DRT750WA… | 7.5-18.0 | 1.15 | 180 | WRD500 | FPWRD500D36 | WRD750 | FPWRD750D24 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-580DRT650WA… | 6.5-16.0 | 1.15 | 150 | WRD580 | FPWRD580D28 | WRD650 | FPWRD650D28 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-580DRT750WA… | 7.5-16.0 | 1.15 | 130 | WRD580 | FPWRD580D28 | WRD750 | FPWRD750D24 | Al | Chromate/Painted | Comply | DWG | STEP |
| DH-650DRT750WA… | 7.5-18.0 | 1.15 | 125 | WRD650 | FPWRD650D28 | WRD750 | FPWRD750D24 | Al | Chromate/Painted | Comply | DWG | STEP |
Example: DH-500DRT650WA130PPA
All Dolph-MW models include a Surtec/corrosion protection treatment and are painted flat black. Flanges are unplated, polished and Surtec treated. Other finishes and paint colors are available upon request.
Reference Documents
Use the flange document for interface terminology. The high-power termination PDF below covers a different component and does not establish a power rating for these transitions. For an assembly review, send Dolph both port sizes and flange drawings, operating band, length limit, average/peak power, quantity and required RF test records. Coordinate the transition with the adjoining double-ridged waveguide components.

