HOME » Waveguide, RF & Microwave Components » 6.0 Meter Receive Only Antenna
6.0 Meter Receive Only Antenna
The Dolph 6.0 m prime-focus antenna is designed for fixed satellite reception. Published C-band data covers 3.625–4.2 GHz with 46.0 dBi mid-band gain; Ku-band data covers 10.95–12.75 GHz with 56.09 dBi gain. The corresponding feed interfaces are WR-229 CPR and WR-75 CPR. Select the receive feed, polarization and mounting arrangement for the site. These receive-only specifications do not establish uplink capability.

DH 6.0 Meter Prime Focus C/Ku-Band Receive-Only Antenna
Select this 6.0 m platform for a fixed receive installation when the required band, gain and available site space match the model data. The C- and Ku-band tables list different VSWR, noise-temperature and feed-loss values; use the column for the ordered feed.
Aperture
Frequency Bands
Standard Wind Survival
C / Ku Gain
Designed for Reliable Satellite Receive Stations
Aluminum draw die formed reflector panels and contoured radials support accurate signal reception.
The published structure is galvanized steel, with hot-dipped galvanizing listed as an option. Specify coastal exposure, coating requirements and the delivered structural package rather than assuming an environmental rating from the finish alone.
Single feed and multi-feed options available according to project requirements.
Manual or motorized options with non-penetrating and penetrating mount solutions.
Product Specifications
Frequency bands
C- and Ku-band receive values are tabulated below. L-band is listed as a configuration option without corresponding RF values on this page.
Reflector Material
Aluminum Draw Die Formed
Construction
Galvanized Steel, Hot-Dipped Option Available
Wind conditions
The product lists 125 mph standard survival and a 180 mph high-wind option. Confirm the offered configuration, antenna position and foundation; survival wind is not an operating or pointing-accuracy rating.
Mounting Options
Non-Penetrating, Penetrating Mounts
Feed Systems
Single Feed, Multi-Feed Available
Operational Ease
Manual, Motorized Options

RF Performance Data
| C/Ku-band Linear | Receive | Receive |
|---|---|---|
| Frequency, GHz | 3.625-4.2 | 10.95-12.75 |
| Mid-Band Gain, dBi | 46.0 | 56.09 |
| VSWR | 1.4:1 | 1.3:1 |
| 3dBBeam Width, deg | 0.82 | 0.27 |
| Noise Temperature — 20 Deg Elevation, K | 51 | 55 |
| Noise Temperature — 30 Deg Elevation, K | 47 | 49 |
| Typical G/T @ 10 Degrees | 26.8 | 33.5 |
| Port to Port Isolation — Rx to Rx (same band),dB | 30 | 30 |
| Axial ratio,dB | 1.5 | |
| Cross-pol on Axis, dB | 30 | 30 |
| Insertion Loss, dB | 0.35 | 0.25 |
| Feed Interface | WR-229 CPR | WR-75 CPR |
| Radiation Pattern Compliance | FCC 25.209, ITU-RS.580-6 | |
| First sidelobe, dB | ≤ -14 | |
| Sidelobe Envelope | 32 – 25 log (1°≤θ<20°) | |
Engineering Support for Your Project
Send the receive frequency range, polarization, feed arrangement and receiver interface, plus ground/roof location, foundation drawing and operating/survival wind criteria. Identify any L-band or multifeed requirement separately from the tabulated C/Ku configuration.
Related options: 2.4/3.0 Meter Rx Only Antenna Systems, 3.7/4.5 Meter Prime Focus Antenna, 6.2/7.3 Meter Large Size Antenna.
Send RFQ
