11.3 Meter Earth Station Antenna

The DH 11.3 m earth station antenna provides a large fixed aperture for satellite uplink and downlink. The Ku-band linear configuration covers 10.95–12.75 GHz receive and 13.75–14.5 GHz transmit, with listed mid-band gains of 61.4 dBi and 62.32 dBi. Both feed interfaces are WR-75 CPR. Select the drive, foundation and wind package for the site; optional bands require their own feed specifications.

11.3 Meter Dual-Reflector Earth Station Antenna | DH 11.3M DR

Use the 11.3 m aperture when the link budget requires its listed Ku-band gain and the site can support its foundation, clearance and pointing requirements. The catalogue gives 1.3:1 VSWR for the specified receive and transmit paths; these values do not apply automatically to alternative feeds.

Dolph Microwave 11.3 meter dual-reflector earth station antenna

Published 11.3 Meter Configuration

The DH 11.3 Meter DR uses 16 formed aluminum panels with matched radials and hub. The mechanical table specifies 0.5 mm RMS surface accuracy and manual or motorized jack-screw drive. The optical-design descriptions differ between sources; use the approved reflector and feed drawing to resolve Cassegrain versus ring-focus wording.

11.3 mReflector aperture, 37 feet
16Precision-formed aluminum panels
0.5 mmSurface accuracy (RMS)
125 mphPublished survival wind, 200 km/h

Configuration Details

Optics and reflectorThe product page describes a Dual-Reflector, Cassegrain design; the mechanical data sheet lists Ring- focus design.
FoundationReinforced Concrete Foundation, or Non-penetrating mount (NPM).
Mount and driveKingpost pedestal, elevation-over-azimuth axis configuration; manual / motorized jack screw.
Feed configurationsWide-band high RF performance, LP adjustable feed; different frequency ranges are available from multiple feed configurations.

The product page lists C-band, Ku-band and Ka-band feed options and LP/CP configurations. The published 11.3 meter data sheet provides detailed Ku-band linear performance and also notes X- (Military/WGS), C-, or Ka-band capabilities. Band, polarization and feed configuration should be confirmed for the required antenna build.

RF & Antenna Specifications

Ku-band Linear Receive Transmit
Frequency, GHz10.95-12.7513.75-14.5
Mid-Band Gain, dBi61.462.32
VSWR1.3:11.3:1
3dB Beam Width, deg0.150.13
Noise Temperature
10 Deg Elevation, K73
20 Deg Elevation, K65
Typical G/T @ 10 Degrees38.7
Port to Port Isolation
Tx to Rx (same band),dB
85
Tx Power Capability, KW1
Cross-pol. on Axis, dB3535
Insertion Loss, dB0.300.25
Feed InterfaceWR-75 CPRWR-75 CPR
Radiation Pattern ComplianceFCC 25.209, ITU-RS.580-6,
First sidelobe, dB≤ -14
Sidelobe Envelope32 – 25 log (1°≤θ<20°)

The source cites FCC 25.209, IESS and different ITU-RS.580 revisions, and names satellite-operator approvals. Obtain the current approval or radiation-pattern report for the ordered feed and antenna configuration; the names in the datasheet are not evidence of blanket or current approval.

Confirm the RF and Site Configuration Before Quotation

Send the required band, Tx/Rx frequencies, polarization, site wind condition, foundation preference, drive type and RF interface.

Mechanical Specifications

Antenna OpticsRing- focus design
Refector Aperture11.3 Meters (37 Feet)
Reflector Panels16 precision-formed aluminum panels
Antenna FoundationReinforced Concrete Foundation, or
Non-penetrating mount (NPM)
Mount ConfigurationKingpost Pedestal Elevation-over
Azimuth axis configuration
Drive TypeManual / Motorized jack screw
Surface Accuracy (RMS)0.5 mm
Finishes
Reflector Surface
Aluminum panels with high-diffusing
white paint
Pedestal & Reflector
Backup Structure
Galvanized steel parts/ Hot Dipped
Galvanized After Fabrication Galvanized
Elevation Travel5° to 90 ° Continuous,
Azimuth Travel±85° or 360° Continuous,
Pol. Travel±90°Continuous,
Rear structure, reflector panels and pedestal of the 11.3 meter earth station antenna
11.3 meter earth station antenna environmental configuration

Environmental Performance

Operational Wind45 mph (72 km/h) gusting to 60 mph (97 km/h)
Survival Wind125 mph (200 km/h),
Temperature-40° C to +50° C
Humidity0-98%

The environmental table gives 45 mph operating wind, gusting to 60 mph, and 125 mph survival wind. A separate feature describes a higher-wind option. Confirm its structural package, antenna position and RF acceptance conditions; survival is not a pointing-performance rating.

Combined C and Ku band antenna feed network from Dolph Microwave

Feed and RF Chain Integration

If your 11.3 meter antenna scope includes the RF feed chain, Dolph can configure feed systems around the required band, polarization, dish type and interface. Dolph’s feed-system portfolio includes feed horns, OMTs, filters, diplexers, polarizers, rotary joints and complete RF networks.

For complete antenna projects, Dolph states that its own feed and waveguide parts can be integrated with antennas supplied through partner factories. This keeps the antenna, feed and waveguide scope aligned without presenting partner-built antenna hardware as in-house microwave-component production.

Review Custom Antenna Feed Systems or the Antenna Feeder Networks when the antenna quotation also requires a feed or waveguide sub-system.

Available Features and Options

High Precision AlignmentStretch-formed doubly contoured panels with matched radials and hub for field alignment.
Galvanized Steel PartsGalvanized steel parts / hot dipped galvanized are listed in the published key features.
Turning Head LMA Pedestal OptionTurning Head LMA El-over Az axis pedestal option is listed in the data sheet.
Field-Changeable Feed ChoicesDifferent frequency ranges are available from multiple feed configurations.
Product-Page OptionsThe current product page lists an auto-track control system, feed blower or deicing controls, and multiple Tx/Rx port configurations. Confirm availability and scope for the selected build.
Published Type Approval ReferenceThe source names Intelsat / Asiasat / APT / Chinasat; obtain applicable approval evidence for the selected configuration.

How Dolph Supports the RF Scope

Dolph was founded in 2001. For Dolph-built microwave and feed components, the company lists CNC machining, turning, waveguide forming and bending, brazing, assembly and other controlled manufacturing processes.

Feed-system work is supported by Dolph’s testing laboratory and on-site hybrid anechoic chamber. These facilities apply to Dolph-built feed and microwave components; final antenna-project scope should be confirmed in the quotation.

See Manufacturing and About Dolph for the company’s published manufacturing and quality background.

Dolph Microwave CNC workshop
Dolph Microwave testing laboratory

Applications

Global Telecommunications

Fixed satellite links where the required gain, polarization and antenna pointing range match the selected network.

Broadcasting

Broadcast uplinks and downlinks with separate transmit-power, receive-noise and radiation-pattern acceptance criteria.

Data and Voice Communication Networks

Data and voice services that use compatible modems, outdoor RF equipment and satellite capacity.

Teleport and Hub Stations

Teleport installations with foundation space, access for alignment and defined feed-chain responsibility.

Scientific Research

Satellite data collection where the frequency plan and tracking requirement match the selected antenna and controller.

Send the Details Needed for an Accurate Quote

Operating band and Tx/Rx frequencies, polarization, RF interface, site wind requirement, foundation preference and manual or motorized drive requirement.

Technical References

For projects using a customized feed chain, see multi-band antenna feed network integration and waveguide feed-to-dish connection guidance.

Dolph publishes a one-year warranty covering defective material and workmanship from the date of delivery, subject to the published warranty terms.

11.3 Meter Data Sheet

The published PDF contains the Ku-band RF table, mechanical specifications, environmental limits, feed interface and radiation-pattern references shown above.

11.3 Meter Dual-Reflector Earth Station Antennas System Data Sheet
Scroll to Top
Blank Form (#3)