Waveguide Pressure Window

A waveguide pressure window separates a pressurized or sealed section from adjacent equipment while transmitting microwave power through a dielectric barrier. Dolph lists 915 MHz and 2450 MHz high-power configurations and a separate WPW model range. Specify RF power, pressure differential, window material, thickness and both flange interfaces together.

Dolph Microwave high-power waveguide pressure window

Built Around Your Frequency, Power and Pressure

Window selection depends on both the RF operating point and the pressure boundary. Supply the maximum differential pressure across the window, including start-up or fault conditions, and identify the gas or process environment on each side.

915 MHz
High-power configuration
2450 MHz
High-power configuration
20 kW CW
Published upper option
16 / 26 mm
Published thickness options

High-Power Configuration Data

These are family-level options. Material, thickness, pressure rating and RF power must be confirmed as one configuration; a thicker window is not automatically an RF-compatible replacement.

Frequency Range915 MHz and 2450 MHz
Handling Power6 kW, 10 kW, up to 20 kW CW
Thickness16 mm, 26 mm, or other thickness on request
Window MaterialGlass, quartz, ceramics
Body MaterialAluminum (Al) / Copper (Cu)
ConfigurationStandard or customized upon request
Waveguide pressure window assemblies from Dolph Microwave

For a broader standard rectangular-waveguide range outside the 915 MHz and 2450 MHz high-power line, see Waveguide Pressure Windows.

Need a direct replacement or non-standard flange?

Send the existing part number, drawing or mating flange dimensions with your operating data.

Send Drawing for Review

WPW Datasheet Models

The WPW datasheet rows below cover WR430, WR340 and WR284, with 100–6000 W and 15–45 PSIG entries. These rows are separate from the higher-power feature summary and the DH-26WPW16 build; do not combine their limits into a single specification.

Model WR Type Frequency (GHz) VSWR Max. IL (dB) Pressure (PSIG) Handling Power (W)
DH-22WPW…WR4301.72-2.611.250.215-45100-6000
DH-26WPW…WR3402.17-3.301.250.215-45100-6000
DH-32WPW…WR2842.60-3.951.250.215-45100-6000
Window Material
Fiberglass / Quartz / Ceramics
Flange Type
FDP
Inside Finish
Iridite per MIL-C-5541
Body Finish
Anticorrosion Black Painted
Material
Al / Brass

Ordering Code Reference

Use the product code when you already know the waveguide size, thickness and flange arrangement. The datasheet example is:

DH – 26 WPW 10 P M A
DH
Dolph Microwave
26
WR340
WPW
Waveguide Pressure Windows
10
Thickness 10 mm
P / M
Cover / Grooved flange
A
Aluminum
Dolph Microwave pressure window flange and window detail
Dolph Microwave WR340 high-power waveguide pressure window build

WR340 Build Example

The DH-26WPW16 reference build specifies 2450±25 MHz, 10 kW average power and 30 PSI maximum pressure. Confirm whether that pressure is gauge or differential and obtain the applicable test conditions before selecting it for a pressure boundary.

Model
DH-26WPW16
WG Size
WR340
Frequency
2.45 GHz ± 25 MHz
VSWR
1.5 Max
Average Power
10 kW
Pressure
30 PSI Max
Window
Quartz
Flange
FDP26 Cover / FDM26 Grooved
Finish / Material
Chromate / Aluminum
Temperature
-20℃ to 80℃
Size
138 × 95 × 16 mm

What to Send for a Technical Quote

A clear operating point lets the engineering team check the right window, flange and material combination before quoting.

RF Data

Frequency, CW or peak power, and acceptable VSWR or insertion-loss limit.

Waveguide Interface

WR/BJ size, flange on both ends, mating-part dimensions or an existing drawing.

Pressure & Temperature

State normal and maximum pressure on each side, identify gauge or absolute values, and give the operating temperature range.

Build Requirement

Window material, body material, finish, quantity and inspection or document requirements.

Dolph Microwave CNC workshop

Made and Checked in Dolph’s Xi’an Factory

Dolph lists CNC machining, turning, waveguide forming and bending, plating, soldering and brazing for copper, copper alloys and aluminum among its in-house manufacturing capabilities.

Since 2001
Microwave component manufacturer based in Xi’an.
ISO 9001:2015
Quality Manual and Quality Procedure are published against ISO 9001:2015.
1-Year Warranty
Warranty against defective material and workmanship from delivery, subject to Dolph terms.

Related Waveguide Parts

If you need standard rectangular coverage outside the high-power 915/2450 MHz line, use the broader Waveguide Pressure Windows range.

For a pressurized line that also needs a gas connection or pressure-control point, add a Waveguide Pressure Inlet.

For sealing at adjacent flange joints, match the interface with the correct Waveguide Gasket and O-Ring.

If the pressure window is one part of a larger 915 MHz or 2450 MHz line, review Dolph’s Custom Industrial Microwave Components for matched high-power components.

Dolph Microwave testing laboratory Coordinate measuring machine at Dolph Microwave

Technical Downloads

Use the product sheet for WPW model data and the flange document to confirm Dolph flange designations.

Ready for Selection

Send frequency, CW or peak power, WR/BJ size, operating pressure, flange on both ends, preferred window material, temperature range and quantity. Add a drawing when the part must fit an existing assembly.

Scroll to Top
Blank Form (#3)