Low/Medium Earth Orbit Satellite Tracking Antenna

Dolph LEO/MEO satellite tracking antennas use an X/Y-axis pedestal to follow spacecraft during a ground-station pass. The listed 2.4 m X-band and 3.7 m S+X-band configurations have different RF and tracking specifications. Select the antenna from the mission frequency plan, polarization, required tracking accuracy and site constraints.

Dolph LEO MEO satellite tracking antenna with X/Y-axis rotation pedestal

LEO/MEO Satellite Tracking Antenna Systems

Dolph Microwave LEO/MEO tracking antennas combine an X/Y-axis pedestal, reflector and RF feed for satellite ground-station links. The two tabulated configurations are a 2.4 m X-band antenna and a 3.7 m S+X dual-band antenna. Their frequency ranges, polarization and tracking accuracy differ; select the complete configuration rather than the dish diameter alone.

2.4–7.3 m
Published antenna size range
L / S / X / C / Ku / Ka / Q / V
Platform band capability
LEO / MEO / HEO / GEO
Published tracking coverage

Built Around the Tracking Requirement

The platform lists 2.4–7.3 m apertures, program and automatic tracking, TLE ephemeris input, Ethernet TCP/IP and monitoring and control software. The wider L/S/X/C/Ku/Ka/Q/V band list describes platform options, not simultaneous coverage by either tabulated antenna. Confirm the feed and tracking method for the selected band.

X/Y-Axis Pedestal

Type 1 through Type 4 configurations are published for increasingly larger dishes; the platform also specifies X/Y-axis rotation pedestal non-ballasting technology.

Program + Auto Track

Ethernet TCP/IP and monitoring and control software support remote operation. Specify acquisition, loss-of-signal recovery and safe parking behavior in the control requirements.

TLE Ephemeris Input

Program tracking follows predicted satellite positions from TLE or another supported ephemeris format. Specify the update method and site coordinates; distinguish program tracking from signal-based automatic tracking.

Mono-Pulse Option

Low-loss mono-pulse mode coupler tracking is available for high frequencies and larger aperture antennas.

Dolph TT&C LEO and GEO satellite tracking antenna system

Published Motion and Tracking Performance

-90° to +90°
X-axis motion, zero toward the sky, independent rotation
-90° to +90°
Y-axis motion, zero toward the sky, independent rotation
0.01°–10°/s
Published angular velocity range on both axes
≤0.005°
Published encoder resolution

Published Mechanical Specifications

Open Published Datasheet
Parameter DH 2.4 Meter DR X-band Antenna DH 3.7 Meter DR S+X Dual-band Antenna
Aperture Size2.4 meter3.7 meter (5.9 meter Radome)
Program Tracking Accuracy< 0.09°rms< 0.07°rms
Pedestal + Dish Weight1500kg<1700kg
MountType1, Type 2, Type3, Type4 Available
Pedestal ConfigurationX/Y-axis Rotation Pedestal
Reflector MaterialLight aluminum+steel, / Full light aluminum
Range of MotionX-axis: -90° +90° (zero towards the sky, independent rotation)
Y-axis: -90° +90° (zero towards the sky, independent rotation)
Speed RangeX-axis Angular Velocity: 0.01°~10°/s
Y-axis Angular Velocity: 0.01°~10°/s
Backlash Travel< ±1 (arc minute)
Encoder Resolution≤0.005°
Servo Position Resolution≤0.01°
Pointing AccuracyS and X frequency bands are better than 1/6 half power beamwidth

Published RF Specifications

Parameter DH 2.4 Meter DR X-band Antenna DH 3.7 Meter DR S+X Dual-band Antenna
Feed ConfigurationPrime Focus and Ring-focus, Dichroic Subreflectors
Frequency Range9.3~9.7 GHz (Downlink)8.025~8.4 Ghz (Downlink)
2.2~2.3 Ghz (Downlink)
2.025~2.1 Ghz (Uplink)
Gain(dB)45 dBiX-band 47.63 dBi
S-band 35.38 dBi
Beamwidth/-3dB0.9~1.0°0.6° / 2.4°
Main-beam matching error< 0.1°< 0.1°
VSWR≤1.5:1≤1.5:1
PolarizationV-/H- Pol.LHCP/RHCP
Axial RatioX-band≤0.8dB
S-band≤1.2dB
Cross Pol. Isolation35 dB
Tx/Rx Isolation80dB80dB
Antenna Noise TemperatureTa≤77KX-band Ta≤85K
S-band Ta≤130k
Feed InterfacesX-band WR112X-band WR112
S-band N-Type
First SidelobesX-band ≤27 dB
S-band ≤27 dB
Sidelobe Leve25 dB @ 2.5 degrees main beam
40 dB @ 5.0 degrees main beam

Use the RF and mechanical values for the same antenna configuration. Encoder resolution is not pointing accuracy: the table separately lists encoder resolution, servo position resolution and program tracking accuracy. Confirm the accuracy test conditions, radome configuration and sidelobe reference convention in the acceptance specification.

Dolph satellite tracking reflector, feed support and X/Y-axis pedestal assembly

What to Send for Quotation

Orbit and Tracking

Target spacecraft or orbit, ephemeris format, acquisition and tracking mode, pass geometry and required angular rate.

RF Requirement

Transmit and receive bands, frequency range, polarization, feed interface and required RF performance.

Mechanical Requirement

Required aperture, radome need, mount type, installation envelope and site constraints.

Control Interface

Ethernet TCP/IP, M&C integration and any remote-operation or network interface requirements.

If your required configuration is not shown in the published table, send the requirement to Dolph Microwave Sales for review before quotation.

Published Application Scope

Earth Observation

Tracking and reception for Earth observation satellite ground systems.

Remote Sensing

Ground-station tracking and data reception for remote-sensing spacecraft.

Communications

Tracking antenna configurations for satellite communication links.

TT&C

Telemetry, tracking and command functions with program and auto tracking.

Space Exploration

Spacecraft communication support where the selected antenna configuration and link requirements are suitable.

Dolph also publishes the system for LEO, MEO, HEO and GEO spacecraft. For the S+X implementation, see the TT&C, LEO and GEO antenna systems article.

Choose the Closest Antenna Platform

For moving-satellite tracking, use this LEO/MEO platform and send the orbit, tracking and RF requirements for configuration review. For a fixed receive-only station, compare the 2.4/3.0 Meter Rx Only Antenna Systems.

For fixed earth-station requirements that do not need this X/Y moving-satellite tracking architecture, review the Earth Station Antenna range.

For portable field deployment, compare the 0.9/1.2 Meter Quick Deploy Auto Acquisition Antenna and the Motorized Quick Deploy Flyaway Antenna.

For feed-chain work around the reflector, review Antenna Feeder Networks or the Custom Antenna Feed Systems capability page.

Dolph Microwave quality inspection and RF measurement work

Engineering and Supplier Verification

Define the supply boundary: reflector, pedestal, controller, radome and RF feed may require separate acceptance records. Include drawings and interface-control documents for equipment supplied by other contractors.

For the RF path, specify receive and transmit bands, polarization, feed interfaces and permitted loss. For the tracking system, specify pointing error, angular rate, acceleration and the conditions under which each limit must be met.

Dolph publishes an ISO 9001:2015 quality-management certificate covering waveguide component design, manufacture and sale. The posted certificate shows validity through August 7, 2026, so request the current certificate status when compliance documentation is required. The website also publishes a one-year warranty for material and workmanship defects.

Send the Tracking Antenna Requirement

Send the orbit or spacecraft information, frequency plan, required aperture, polarization, tracking method, radome or site limits, control interface and required documentation. Dolph Microwave Sales can review the available configuration and quotation path.

Email Technical Requirements

Low/Medium Earth Orbit Satellite Tracking Antenna Systems PDF

Download the original published technical sheet with the mechanical and RF tables for the DH 2.4 Meter DR X-band Antenna and DH 3.7 Meter DR S+X Dual-band Antenna.

Download Published PDF
Scroll to Top
Blank Form (#3)