915 & 2450 MHz Microwave Isolator

Dolph waveguide isolators reduce microwave power returning toward the source when the connected load reflects energy. The catalogue covers 915 and 2450 MHz families, with additional 1300 MHz entries and optional sampling couplers. Choose a configuration using separate forward-power and reverse-power requirements, cooling conditions and the exact waveguide/flange interface.

915 & 2450 MHz Microwave Isolator

Dolph waveguide isolators reduce microwave power returning toward the source when the connected load reflects energy. The catalogue covers 915 and 2450 MHz families, with additional 1300 MHz entries and optional sampling couplers. Choose a configuration using separate forward-power and reverse-power requirements, cooling conditions and the exact waveguide/flange interface.

What to send for a quote

Microwave Isolator
Microwave Isolator
915 / 2450 MHzFeature frequencies
Water or airCooling options
Isolator + couplerCatalogue option

What needs to match your system?

Select the isolator for the worst specified reverse-power event as well as normal forward power. Isolation in dB describes transmission in the reverse direction; it does not state how much reflected power the assembly can dissipate.

What happens when the load changes?

Include the expected reflected power and how long that condition can last. The general power figure on the page does not, by itself, establish a reverse-power rating for every configuration.

Is cooling water available?

The catalogue includes Water-Direct and Air entries. Tell us the cooling arrangement you can support. For a water-cooled unit, include water flow, pressure and inlet-temperature requirements for review.

Do you also need a sampled signal?

Isolator+Coupler configurations are listed. This may be useful when you need a measurement connection as well as isolation. Confirm the sampling direction, coupling and connector for the selected assembly.

Start with the operating limits

SpecificationDetail
Frequency Range915 MHz and 2450 MHz
Waveguide SizeWR340, WR430, WR975
Handling Power6 KW, 10 KW, up to 20 kW cw
CoolingWater or Air-Cooled
Flange TypeCover and Grooved

The feature summary and electrical catalogue cover different model entries. Use the exact frequency row, then obtain the matching power and cooling data for the full part number. Do not infer the model correspondence from table position where row counts differ.

Need a measurement port as well?

Microwave Coupler
Stand-alone microwave coupler for comparison.

The catalogue includes isolator-plus-coupler versions. If you prefer separate components, a stand-alone coupler can be reviewed alongside the isolator. Agree on the measurement arrangement and the mechanical connections together.

See the microwave coupler specifications.

For a system with a separate output path and absorbing load, also review the microwave circulator and microwave water load. These are different component choices, not automatic substitutes for the same assembly.

Check the fit before placing the order

Electrical ratings are not enough if the flanges, connectors or mounting points do not fit. A marked-up drawing is the clearest way to show the space you have.

Keeping an existing installation

Provide the old model, waveguide size, flange faces and mounting dimensions. Include cooling connections and any access limits around the equipment.

Changing the operating conditions

If the frequency, power or cooling has changed, send the new conditions with the old part details. Select against the new requirement before reusing the old specification.

Use the flange designation guide when naming the mating connection. Include a photo if the flange code is not known.

Agree on the build and the checks

Dolph’s manufacturing work includes CNC machining, turning, waveguide forming, brazing, plating and assembly. For a custom part, send the drawing requirements and the checks your team needs before ordering.

CNC machining at Dolph Microwave.
CNC machining at Dolph Microwave.
Microwave measurement equipment at Dolph Microwave.
Microwave measurement equipment at Dolph Microwave.

If you need dimensional results, RF measurements or specific inspection records, list them with your enquiry. Confirm the scope with the selected configuration. See Dolph’s manufacturing capabilities.

Full model and construction details

The electrical rows list VSWR 1.2, insertion loss 0.25 dB and isolation 20 dB. Keep these RF figures separate from thermal and reverse-power ratings, which must be confirmed for the selected cooling arrangement.

The electrical, cooling and finish tables have different row counts. Their model correspondence needs confirmation. Three original cooling headers read “Water Pressure”; those headers are retained below, so do not infer a field name or dimension unit from them.

Electrical model catalogue

ModelConfig.WR TypeFrequency (MHZ)VSWRIL (dB)Isolation (dB)
DH-9WISO915PMA…IsolatorWR975915±251.20.2520
DH-9WISO+WHC915PMA…Isolator+CouplerWR975915±251.20.2520
DH-14WISO1300PMA…IsolatorWR6501300±251.20.2520
DH-14WISO+WHC1300PMA…Isolator+CouplerWR6501300±251.20.2520
DH-22WISO2450PMA…IsolatorWR4302450±251.20.2520
DH-22WISO2450PMA…IsolatorWR4302450±251.20.2520
DH-22WISO+WHC2450PMA…Isolator+CouplerWR4302450±251.20.2520
DH-26WISO2450PMA…IsolatorWR3402450±251.20.2520
DH-26WISO2450PMA…IsolatorWR3402450±251.20.2520
DH-26WISO+WHC2450PMA…Isolator+CouplerWR3402450±251.20.2520
DH-32WISO2450PMA…IsolatorWR2842450±251.20.2520
DH-32WISO2450PMA…IsolatorWR2842450±251.20.2520
DH-32WISO+WHC2450PMA…Isolator+CouplerWR2842450±251.20.2520

Power and cooling catalogue

Coupling (dB)Handling Power (KW)CoolingWater FlowWater PressureWater PressureWater Pressure
20-75-100Water-Direct3-5L/min0.14MPaQuick Connector511*852*213
30-6020-75-100Water-Direct3-5L/min0.14MPaQuick Connector511*852*213
10Water-Direct3-5L/min0.14MPaQuick Connector350*580*170
30-6010Water-Direct3-5L/min0.14MPaQuick Connector350*580*170
3-5-6-15Water-Direct3-5L/min0.14MPaQuick Connector183*335*112
3Air183*335*95
6Water-Direct3-5L/min0.14MPaQuick Connector183*335*112
30-603-5-6-15Water-Direct3-5L/min0.14MPaQuick Connector183*335*112

Finish and material

Flange TypeInside FinishBody FinishMaterial
Cover/GroovedIridite per MIL-C-5541Anticorrosion Black PaintedAl
Cover/GroovedIridite per MIL-C-5541Anticorrosion Black PaintedAl
Cover/GroovedIridite per MIL-C-5541Anticorrosion Black PaintedAl
Cover/GroovedIridite per MIL-C-5541Anticorrosion Black PaintedAl

Ordering information: DH – 26 WISO 2450 P M A 6KW

CodeDescription
DHDolph Microwave
26Waveguide Type WR340
WISOWaveguide Isolator
2450Freq. 2450 MHz
PFlange Cover
MFlange Grooved
AMaterial Al
6KWHandling Power 6KW CW

Questions before you order

Are the forward and reflected power limits the same?

Do not assume they are. Send both requirements and the expected operating duration. The selected isolator and cooling arrangement need to be checked together.

Can I replace a water-cooled unit with an air-cooled one?

The catalogue lists both cooling methods, but that does not make them interchangeable. Confirm the frequency, power, airflow and mechanical space for the proposed replacement.

The catalogue lists more frequencies and powers. Which values apply?

Use the exact configuration agreed for your order. The feature summary and the detailed tables cover different entries. Some table groups have different row counts, so their correspondence needs confirmation.

Do I need an isolator or a circulator with a load?

That depends on the required port arrangement and how reflected power is handled in your system. Send a simple connection sketch with the operating conditions so those choices can be compared.

Other parts worth checking

These components serve different jobs in a microwave system. Compare their own specifications and interfaces before combining them.

Have a drawing or an existing part?

Send it with the details below. If some details are missing, tell us what you know and which points still need checking.

  • Frequency; forward and reflected power
  • Operating duration and cooling conditions
  • Isolator only or a coupler-equipped assembly
  • Waveguide, flange, mounting and coolant connections

Add the quantity, delivery destination and target date. Ask for the proposed configuration, drawing, price and lead time to be included in the quotation.

Email your requirements
Scroll to Top
Blank Form (#3)